Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nerdesq Cheatsheet?
#1
Hi guys,

I'd like to make graphical cheat sheet for users which will show all button combinations for actions which are not printed on the front panel. 

If you think this would be useful please jump in and help me to compile a list of button combinations as it would be much faster than me doing it alone.

1. Update firmware: Hold SHIFT, COPY, CURSOR UP when powering on.
2. Stop sequencer: Hold SHIFT press STOP.
3. Start all channels: Hold SHIFT press START.

Please feel free to correct my terminology also, if I make mistakes.

Cheers,
Paul
Reply
#2
There is already a list here on the forum somewhere. More to be added. I plan to add the cheat sheet also to the Manual. The manual gets a major update soon and will be also graphically and content pimped up.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
#3
Oh OK cool. Just thought I'd lend a hand as you helped me Smile good to hear! Thanks.
Reply
#4
Hello,

Here is mine, its a bit big but it has all i need currently, in case that helps anyone Smile

Mark - To start the marking of content on the screens
Copy – Copy earlier marked content
Delete – Delete current value or marked content
Record – to start/stop recording
Nerd – use for different functions (like a context menu)
Setup – Enter the Setup screen

Start – Start sequencer or trigger a pattern
Stop – Stop a pattern (stop the sequencer in combination with SHIFT)
Shift - Get to the 2nd function of buttons or edit functionality
OK – Create a new pattern / patch. Enter/Accept, Pre-listen Note
UP – Page up for 16 steps ? move the cursor 16 rows up
DOWN – Page down for 16 steps ? move the cursor 16 rows down




SHIFT + CURSOR LEFT -> Decrease (-) value by 1 (value or semitone for notes)
SHIFT + CURSOR RIGHT -> Increase (+) value by 1 (value or semitone for notes)
SHIFT + DOWN/UP -> Decrease/Increase value by:
• 1 octave for notes
• 16 ($10) for regular values which can be < FF (255)
 64 ($40) for values which can be > FF (255)
• 10 for FX types




SHIFT + DELETE you can delete/empty values

SHIFT + DOWN + START mutes or unmutes the current track
SHIFT + UP + START solos the current track


Sequencer:
SHIFT+START   start the whole row
SHIFT + STOP stops the player
START 2 times will trigger the next pattern faster
STOP stops the pattern after it’s finished

OK create a new pattern
SHIFT+OK clone a pattern

SHIFT + CURSOR LEFT/RIGHT browse to the wanted pattern number

PATTERN Enter a pattern

SHIFT+MARK copy a block
(SHIFT+DOWN mark all)
SHIFT+COPY saved block is being copied to the recent position
SHIFT+pgDOWN+COPY   saved block is being inserted to the recent position

SHIFT+DELETE To delete/empty only the current cursor position (or block)
SHIFT+UP+DELETE delete the position and move the following rows one up (or block)



Automator:
SHIFT + LEFT/RIGHT change the Slot and Modulation settings
OK Start and Stop toggle
SHIFT + CURSOR RIGHT Start
SHIFT+ CURSOR LEFT Stop


Recording:
The sources can be initialized in the project screen ? Record Settings

SHIFT+RECORD to enable recording
SHIFT+RECORD again will stop the recording while the pattern keeps playing.
Stopping the sequencer (SHIFT+STOP) will also turn recording off.



Misc
The MOD output can also Generate Note-scaled values:
Behind FFF the note scaling begins from C-0 to A#9. Using the OK button the values can
fastly be toggled between 000, 800, C-0, C-4 and C-8.

A table number in the column will start the table and it can be
stopped using the table stop command in the same column below table 00 showing as the
two asterisks ‘**’.


FXs:
PTCH ? Pitch: Changes the CV pitch in fine steps. 40 is the middle point
GL C ? Glide CV: Lets the Note glide to the next note
GLCS ? Glide CV steps: changes the steps for the glide.
MOD ? Modulate, changes the MOD CV output, same as the MOD column
GL M ? Glide MOD: Lets the Mod output voltage glide to the next selected value in the sequencer
GLMS ? Glide MOD steps: same like for Notes but then for the MOD output
TRIG ? Trigger Triggers the trigger output, same as the trigger column but without
auto-gating overrule
CV1..6 ? changes the CV of the CV outputs 1 .. 6.
TRG1..6 ? Trigger 1..6 Triggers for the outputs 1...6
MOD1..6 ? Modulate 1..6 changes the CV of the MOD outputs
PRCV ? Probability percentage for the Note column.
PRTR ? Probability percentage for the Trigger column.
PRMD ? Probability percentage for the MOD output.
PRTB ? Probability percentage for the Table column.
PRF1 ? Probability percentage for the FX1 effect column.
PRF2 ? Probability percentage for the FX2 effect column.
PRF3 ? Probability percentage for the FX3 effect column.
PRF4 ? Probability percentage for the FX4 effect column.
ASL0..ASL7 ? Automator settings for Automator slots 0 ..7.  
X00, The first digit (X) is the function of the automator
The 2nd 2 digits 0XX is for the value
RDMN  Random next FX value for the same FX column.
BASE: Basenote transposes all following notes  > 00 is higher, < FF is lower
KILL: Stops the note faster than the next coming step
BPM ? Changing the main Tempo
BRK 108 ? Jumps with the player to row/position 8 in the same pattern
SPFX ? Special FX command. Contains some non-value special functions:
000 - No function
001 – Stop Track at the end of the Pattern
002 – Stop Track immediately
003 – Stop Song immediately
004 – Set Clock Output
005 – Reset Clock Output
006 – Pulse Clock Output
007 – Set Clockreset Output
008 – Reset Clockreset Output
009 – Pulse Clockreset Output
00A – Reset all FX values of the track
00B – Reset all FX values of all tracks
00C – Jump to a random position in the same pattern
00D – Resync Track to the mainclock (synchronizes on the zero cross of the mainclock)
00E – Resync All tracks to the mainclock (synchronizes on the zero cross of the mainclock)



The Nerd Button
Nerd Menu, you can also give a pattern a name.
Sequencer screen:
- Undo -
- Reset Track FX ? Resets all FX / Current values of the track
- Reset All FX ? Resets all FX / Current values of all tracks
- Resync Track – Resynchronizes the Track to the mainclock on the clock zero cross
- Resync All – Resynchronizes all Tracks to the mainclock on the clock zero cross
Pattern screen:
If nothing is marked:
- Undo The last change in the pattern screen (this pattern, not from others) will be reverted.
- Randomize value : Randomizes the current value if possible
- Reset Track FX ? Resets all FX / Current values of the track
- Edit Pattern Name ? Opens a texteditor to add/ change the name of the current pattern
Block is marked:
Transpose +1 - Transposes the marked notes one subnote higher
Transpose -1 - Transposes the marked notes one subnote lower
Transpose +12 - Transposes the marked notes one octave higher
Transpose -12 - Transposes the marked notes one octave lower
Flip Rows – Flips the order of the marked rows around, up is down and down is up
Randomize Row order – Randomizes the order of the marked rows.
Randomize Values – Randomizes the marked values, if possible
Reply
#5
(09-19-2018, 03:35 PM)ludotex Wrote: Hello,

Here is mine, its a bit big but it has all i need currently, in case that helps anyone Smile

Mark - To start the marking of content on the screens
Copy – Copy earlier marked content
Delete – Delete current value or marked content
Record – to start/stop recording
Nerd – use for different functions (like a context menu)
Setup – Enter the Setup screen

Start – Start sequencer or trigger a pattern
Stop – Stop a pattern (stop the sequencer in combination with SHIFT)
Shift - Get to the 2nd function of buttons or edit functionality
OK – Create a new pattern / patch. Enter/Accept, Pre-listen Note
UP – Page up for 16 steps ? move the cursor 16 rows up
DOWN – Page down for 16 steps ? move the cursor 16 rows down




SHIFT + CURSOR LEFT -> Decrease (-) value by 1 (value or semitone for notes)
SHIFT + CURSOR RIGHT -> Increase (+) value by 1 (value or semitone for notes)
SHIFT + DOWN/UP -> Decrease/Increase value by:
• 1 octave for notes
• 16 ($10) for regular values which can be < FF (255)
 64 ($40) for values which can be > FF (255)
• 10 for FX types




SHIFT + DELETE you can delete/empty values

SHIFT + DOWN + START mutes or unmutes the current track
SHIFT + UP + START solos the current track


Sequencer:
SHIFT+START   start the whole row
SHIFT + STOP stops the player
START 2 times will trigger the next pattern faster
STOP stops the pattern after it’s finished

OK create a new pattern
SHIFT+OK clone a pattern

SHIFT + CURSOR LEFT/RIGHT browse to the wanted pattern number

PATTERN Enter a pattern

SHIFT+MARK copy a block
(SHIFT+DOWN mark all)
SHIFT+COPY saved block is being copied to the recent position
SHIFT+pgDOWN+COPY   saved block is being inserted to the recent position

SHIFT+DELETE To delete/empty only the current cursor position (or block)
SHIFT+UP+DELETE delete the position and move the following rows one up (or block)



Automator:
SHIFT + LEFT/RIGHT change the Slot and Modulation settings
OK Start and Stop toggle
SHIFT + CURSOR RIGHT Start
SHIFT+ CURSOR LEFT Stop


Recording:
The sources can be initialized in the project screen ? Record Settings

SHIFT+RECORD to enable recording
SHIFT+RECORD again will stop the recording while the pattern keeps playing.
Stopping the sequencer (SHIFT+STOP) will also turn recording off.



Misc
The MOD output can also Generate Note-scaled values:
Behind FFF the note scaling begins from C-0 to A#9. Using the OK button the values can
fastly be toggled between 000, 800, C-0, C-4 and C-8.

A table number in the column will start the table and it can be
stopped using the table stop command in the same column below table 00 showing as the
two asterisks ‘**’.


FXs:
PTCH ? Pitch: Changes the CV pitch in fine steps. 40 is the middle point
GL C ? Glide CV: Lets the Note glide to the next note
GLCS ? Glide CV steps: changes the steps for the glide.
MOD ? Modulate, changes the MOD CV output, same as the MOD column
GL M ? Glide MOD: Lets the Mod output voltage glide to the next selected value in the sequencer
GLMS ? Glide MOD steps: same like for Notes but then for the MOD output
TRIG ? Trigger Triggers the trigger output, same as the trigger column but without
auto-gating overrule
CV1..6 ? changes the CV of the CV outputs 1 .. 6.
TRG1..6 ? Trigger 1..6 Triggers for the outputs 1...6
MOD1..6 ? Modulate 1..6 changes the CV of the MOD outputs
PRCV ? Probability percentage for the Note column.
PRTR ? Probability percentage for the Trigger column.
PRMD ? Probability percentage for the MOD output.
PRTB ? Probability percentage for the Table column.
PRF1 ? Probability percentage for the FX1 effect column.
PRF2 ? Probability percentage for the FX2 effect column.
PRF3 ? Probability percentage for the FX3 effect column.
PRF4 ? Probability percentage for the FX4 effect column.
ASL0..ASL7 ? Automator settings for Automator slots 0 ..7.  
X00, The first digit (X) is the function of the automator
The 2nd 2 digits 0XX is for the value
RDMN  Random next FX value for the same FX column.
BASE: Basenote transposes all following notes  > 00 is higher, < FF is lower
KILL: Stops the note faster than the next coming step
BPM ? Changing the main Tempo
BRK 108 ? Jumps with the player to row/position 8 in the same pattern
SPFX ? Special FX command. Contains some non-value special functions:
000 - No function
001 – Stop Track at the end of the Pattern
002 – Stop Track immediately
003 – Stop Song immediately
004 – Set Clock Output
005 – Reset Clock Output
006 – Pulse Clock Output
007 – Set Clockreset Output
008 – Reset Clockreset Output
009 – Pulse Clockreset Output
00A – Reset all FX values of the track
00B – Reset all FX values of all tracks
00C – Jump to a random position in the same pattern
00D – Resync Track to the mainclock (synchronizes on the zero cross of the mainclock)
00E – Resync All tracks to the mainclock (synchronizes on the zero cross of the mainclock)



The Nerd Button
Nerd Menu, you can also give a pattern a name.
Sequencer screen:
- Undo -
- Reset Track FX ? Resets all FX / Current values of the track
- Reset All FX ? Resets all FX / Current values of all tracks
- Resync Track – Resynchronizes the Track to the mainclock on the clock zero cross
- Resync All – Resynchronizes all Tracks to the mainclock on the clock zero cross
Pattern screen:
If nothing is marked:
- Undo The last change in the pattern screen (this pattern, not from others) will be reverted.
- Randomize value : Randomizes the current value if possible
- Reset Track FX ? Resets all FX / Current values of the track
- Edit Pattern Name ? Opens a texteditor to add/ change the name of the current pattern
Block is marked:
Transpose +1 - Transposes the marked notes one subnote higher
Transpose -1 - Transposes the marked notes one subnote lower
Transpose +12 - Transposes the marked notes one octave higher
Transpose -12 - Transposes the marked notes one octave lower
Flip Rows – Flips the order of the marked rows around, up is down and down is up
Randomize Row order – Randomizes the order of the marked rows.
Randomize Values – Randomizes the marked values, if possible
Wow that is big!!! Thanks
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)