Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Release Candidate Firmware V1.20 RC5
[Image: j706.gif]
Reply
I'm experimenting with the live input for triggering sample 7 (RC3).
- Why isn't sample 8 also available?
- It seems that the sample is only played for the (short) duration of the trigger. I would prefer it to be triggered and then finish till the end of the sample, as long as no new trigger is received.
Reply
(10-15-2019, 02:48 PM)Acheface Wrote: I'm experimenting with the live input for triggering sample 7 (RC3).
- Why isn't sample 8 also available?
- It seems that the sample is only played for the (short) duration of the trigger. I would prefer it to be triggered and then finish till the end of the sample, as long as no new trigger is received.

See here:
Quote:Sample Gate/Pitch/Offset/Slot  Use shift up/down/left/right when setting up. All settings can be set up for each individual input and some only makes sense when combined.

You can select the other sample/outputs by shift+up/down there and so also sample 8.
The sample works as a Gate and plays as long as the gate is on. No trigger function. That also because there is no stop and leaving the samples playing always is often not wanted.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
I confirm 1.2 v/oct working perfectly on my 208r rev.1, voltages seem spot on using the passive minijack <-> banana converter whose ground is connected to the Buchla.
Hurray!
Gates, however, trigger the envelope but don't tickle the pulser. Have to route through Synovatron to get it going but that's totally OK!
Reply
Hi RC4 - Live Input Pass through - Trigger 6 is missing from the menu?
CV & Mod menu list all 1-6 outputs.
Trigger menu - 1-5
Reply
(10-16-2019, 01:39 AM)joe_biomassa Wrote: Gates, however, trigger the envelope but don't tickle the pulser. !
try to move "period" slider up - around .025 there pulser will react Smile
Reply
(10-14-2019, 03:47 PM)XORadmin Wrote: I just updated to V1.20 RC4 which fixes all the current known issues and adds some cool new stuff.
If all is well now i will make this the final release. So go on, test the stuff. I plan to release in approx. 1-2 weeks from now.
Also, they have been 2 reports of triggers hanging when using Midi recording. I couldn't reproduce it at all (with the same hardware) and didn't get any more response which could help to find the issue. I will leave it as it is for now and if it appears to happen to you as well, be sure you can provide me all the details and most important how to reproduce it, so it can be fixed.

Also at last, the bootloader might look weird from now on. The code crossed a barrier in size where the progressbar returns to zero again and continues to run. This is only a visual issue, when the flashing succeeded (as usual) then it still says Update succeed and all is fine. So no worries, all is fine!!

* Update RC4 *
- added mute and Solo for trigger16 expander (works like regular mute/solo but then in the trigger16 pattern screen on triggers 1..8/9..16 or drummatrix)
- added mute to launchpad in trigger16 screen on top buttons
- Fixed some Launchpad Colours
- Colours on Launchpad for uncoloured Patterns on sequencer screen
- New recording functions for CV/Gate and Trigger recordings including delayed recordings for slow CV's  (keystep workaround)
- added CV passthrough mode
- added Volt/Hz and 1.2V/Oct (buchla) scaling for outputs (couldn't test with hardware myself, so this is up to you)
- Added 'Nudge' function, (project screen->Tempo->SHIFT+OK+UP/DOWN/LEFT/RIGHT) for fine and rough nudge
- little visible fix for DINSYNC
- added 'enter pattern on OK' function (setup setting). Also OK creates only a new pattern when the field was empty.
- If no pattern is available anymore, add a status message. Fixed also a bug if the last available pattern was used.
- Bugfix when using stop track functions (trigger staying on fixed)
- added note transpose of marked values from sequencer screen (really changes notes in the patterns)
- added MOD note transpose
- added function to change global transpose on a zero transition or when pressing/holding OK changing directly
- Added track transpose to sequencer screen Nerd menu. All tracks have also their own transpose now.
- Fixed loading issue of older projects < V1.19 where the automator settings were messed up
- added pre-listening also for midi tracks when pressing OK or holding OK and navigating (also polyphonic)
- fixed Page UP/Down in sequencer screen when marked

Peace!

So many good fixes and bonus features.  I am looking forward to trying this out as soon as I can! Big Grin
Reply
(10-15-2019, 02:56 PM)XORadmin Wrote:
(10-15-2019, 02:48 PM)Acheface Wrote: I'm experimenting with the live input for triggering sample 7 (RC3).
- Why isn't sample 8 also available?
- It seems that the sample is only played for the (short) duration of the trigger. I would prefer it to be triggered and then finish till the end of the sample, as long as no new trigger is received.

See here:
Quote:Sample Gate/Pitch/Offset/Slot  Use shift up/down/left/right when setting up. All settings can be set up for each individual input and some only makes sense when combined.

You can select the other sample/outputs by shift+up/down there and so also sample 8.
The sample works as a Gate and plays as long as the gate is on. No trigger function. That also because there is no stop and leaving the samples playing always is often not wanted.
Thanks for the helpful reply! The gate behaviour makes it more difficult to use the live input for fast drum fills from e.g. Grids, but putting an ADSR with retrig functionality in the path helps a little, I've found.
Reply
(10-16-2019, 10:52 AM)Barney Rubble Wrote: Hi RC4 - Live Input Pass through  - Trigger 6 is missing from the menu?
CV & Mod menu list all 1-6 outputs.
Trigger menu - 1-5

I hate Trigger 6. Thats why!!!! I hate it i hate it i hate it! Angry 


Tongue 


PS: Thx for the report  Smile
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
I’m not a number, I’m a free trigger !
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)