07-07-2021, 07:55 PM
The first batch of More Video-IO Expanders have been shipped now and these need a new firmware to work.
Today I am happy to already put the release candidate online with working functions for the video expander. The main functions has actually already been tested by some video-betatesters.
For those without the video expander and without the need of it, some other functions have been added aswell (as usual).
- added video mode setting in setup screen (OK to enter video settings)
- added endless repetitions of patterns when BRK repetition value is 255/0xff
- added velocity -> MOD output for midi clone to modular
- fixed missing/wrong probability from automators if sample tracks are set to something else
- fixed wave file loading for some wavefiles
- added octave change in wavefile preview
- added launch mode function. beside the regular launch possibilities there is now an additional synchronizing to queuepoints/zero cross launchmode (Setup -> Pattern Launch Type)
- fixed midi issue for velocity/mod recording on other tracks than 1
- changed TRIGGER_ALL_OFF function to Extra Trigger FX which involves Trigger all Off and swap trigger commands from the FX
- implemented firmware update / file transfer for the video expander
* Note for the video expander! It is not getting detected automatically but you turn it on and off manually in the Setup screen.
Setup -> Video Expander -> Off / USB only / Clone.
Please check this thread for some of the video expander information:
https://xor-electronics.com/forum/showth...p?tid=1140
As usual, this is a release candidate. Not intended for productive use as i can't guarantee any unexpected side effects. Saved projects will guaranteed to work for the release version but are not backwards compatible to 1.24 or earlier. So be aware to backup your projects first!!!
And you can always go back to the stable versions in case of any issues.
UPDATE RC2:
- fixed the launch issue which would lead to unpredicted behaviour (like setting BPM to 1 or changing the track clock)
UPDATE RC3:
- fixed another launch issue which would lead to unpredicted behaviour (like setting BPM to 1 or changing the track clock) as well as not launching selected parts
- updated SETW command for samples so it would overrule samples or waveforms selected from the sample/wave column is used from the pattern FX
- fixed some minor drawing glitches
UPDATE RC4:
- added global swing function (project screen) for the internal clock (+- 1/64th precision). Be aware that the output clock is also affected by the swing.
- fixed PC Keyboard editing for midi and others. Added swing editing (ctrl +/- )
- added clock change shortcut. If on the clock in settings with any external clock pressing shift+delete will switch seamless to internal clock.
- fixed delete marked values with shift up function for pattern screens
- added 'clock out disabled' function. So the Clock and Reset outputs can be used to generate own clocks or additional gates/triggers.
- fixed/finetuned live random values results
- added random ranges to the randomize functions in the Nerd Menu
- added midi notes and velocity to the randomize functions
UPDATE RC5:
- fixed issue if the clock multiplier is set to a high value and stopping that pattern (leads to another 1bpm situation)
- added SHIFT+DOWN+DELETE on sequencer screen to move a column one down (insert empty one). Works also for the insert key on a computer keyboard.
Download the release candidate below, follow the firmware update rules and if you get stuck there and it doesn't work, read the many threads about it and it will be fine!! Updating always works!
Enjoy!
Today I am happy to already put the release candidate online with working functions for the video expander. The main functions has actually already been tested by some video-betatesters.
For those without the video expander and without the need of it, some other functions have been added aswell (as usual).
- added video mode setting in setup screen (OK to enter video settings)
- added endless repetitions of patterns when BRK repetition value is 255/0xff
- added velocity -> MOD output for midi clone to modular
- fixed missing/wrong probability from automators if sample tracks are set to something else
- fixed wave file loading for some wavefiles
- added octave change in wavefile preview
- added launch mode function. beside the regular launch possibilities there is now an additional synchronizing to queuepoints/zero cross launchmode (Setup -> Pattern Launch Type)
- fixed midi issue for velocity/mod recording on other tracks than 1
- changed TRIGGER_ALL_OFF function to Extra Trigger FX which involves Trigger all Off and swap trigger commands from the FX
- implemented firmware update / file transfer for the video expander
* Note for the video expander! It is not getting detected automatically but you turn it on and off manually in the Setup screen.
Setup -> Video Expander -> Off / USB only / Clone.
Please check this thread for some of the video expander information:
https://xor-electronics.com/forum/showth...p?tid=1140
As usual, this is a release candidate. Not intended for productive use as i can't guarantee any unexpected side effects. Saved projects will guaranteed to work for the release version but are not backwards compatible to 1.24 or earlier. So be aware to backup your projects first!!!
And you can always go back to the stable versions in case of any issues.
UPDATE RC2:
- fixed the launch issue which would lead to unpredicted behaviour (like setting BPM to 1 or changing the track clock)
UPDATE RC3:
- fixed another launch issue which would lead to unpredicted behaviour (like setting BPM to 1 or changing the track clock) as well as not launching selected parts
- updated SETW command for samples so it would overrule samples or waveforms selected from the sample/wave column is used from the pattern FX
- fixed some minor drawing glitches
UPDATE RC4:
- added global swing function (project screen) for the internal clock (+- 1/64th precision). Be aware that the output clock is also affected by the swing.
- fixed PC Keyboard editing for midi and others. Added swing editing (ctrl +/- )
- added clock change shortcut. If on the clock in settings with any external clock pressing shift+delete will switch seamless to internal clock.
- fixed delete marked values with shift up function for pattern screens
- added 'clock out disabled' function. So the Clock and Reset outputs can be used to generate own clocks or additional gates/triggers.
- fixed/finetuned live random values results
- added random ranges to the randomize functions in the Nerd Menu
- added midi notes and velocity to the randomize functions
UPDATE RC5:
- fixed issue if the clock multiplier is set to a high value and stopping that pattern (leads to another 1bpm situation)
- added SHIFT+DOWN+DELETE on sequencer screen to move a column one down (insert empty one). Works also for the insert key on a computer keyboard.
Download the release candidate below, follow the firmware update rules and if you get stuck there and it doesn't work, read the many threads about it and it will be fine!! Updating always works!
Enjoy!