+- XOR Userforum (https://xor-electronics.com/forum)
+-- Forum: Products (https://xor-electronics.com/forum/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://xor-electronics.com/forum/forumdisplay.php?fid=6)
+---- Forum: Firmware / Manual (https://xor-electronics.com/forum/forumdisplay.php?fid=11)
+---- Thread: Dualchord Firmware V1.2 (/showthread.php?tid=1921)
Dualchord Firmware V1.2 - XORadmin - 01-22-2025
This is a little maintenance update for the Dualchord firmware which fixes 2 minor issues:
- Note offset fix (combined with NerdSEQ Firmware V2.02A)
- Knobs are now getting initialized after project load
dualchord_1_2.nxp (Size: 124,12 KB / Downloads: 19)
Check the following link for the update instruction:
Expander firmware update
RE: Dualchord Firmware V1.2 - GORSCH - 03-10-2025
What do i do wrong. In the Nerd Track Setup screen for the Dualchord i can fix 32 Step for the Pattern Length of the Sequencer but i get only 16 Step output
RE: Dualchord Firmware V1.2 - XORadmin - 03-11-2025
(03-10-2025, 10:40 PM)GORSCH Wrote: What do i do wrong. In the Nerd Track Setup screen for the Dualchord i can fix 32 Step for the Pattern Length of the Sequencer but i get only 16 Step output
Can be that your mainclock is 16 step, can be your external clock resetting, can be a BRK command in the pattern and possibly some other things.
Share the project here or via email to me and I can tell you.
RE: Dualchord Firmware V1.2 - GORSCH - 03-12-2025
(03-11-2025, 06:32 AM)XORadmin Wrote:(03-10-2025, 10:40 PM)GORSCH Wrote: What do i do wrong. In the Nerd Track Setup screen for the Dualchord i can fix 32 Step for the Pattern Length of the Sequencer but i get only 16 Step output
Can be that your mainclock is 16 step, can be your external clock resetting, can be a BRK command in the pattern and possibly some other things.
Share the project here or via email to me and I can tell you.
Ah Thomas you're a realy great one. It was the mainclock setting in the Project screen.
Next Prob:
when i want do stop the selected pattern of the dualchord via the button the sound doesn't stop all in all . it "hang"s on the last cord I play and the sound is continiously on the line. I only can stop the sound via the NerdScreen by selecting the order "Stop all sound". Any suggestion how to handle this, Thomas? It would be more comfortable and intuitiv to stop the sound over the button select.
RE: Dualchord Firmware V1.2 - XORadmin - 03-12-2025
(03-12-2025, 01:39 AM)GORSCH Wrote:(03-11-2025, 06:32 AM)XORadmin Wrote:(03-10-2025, 10:40 PM)GORSCH Wrote: What do i do wrong. In the Nerd Track Setup screen for the Dualchord i can fix 32 Step for the Pattern Length of the Sequencer but i get only 16 Step output
Can be that your mainclock is 16 step, can be your external clock resetting, can be a BRK command in the pattern and possibly some other things.
Share the project here or via email to me and I can tell you.
Ah Thomas you're a realy great one. It was the mainclock setting in the Project screen.
Next Prob:
when i want do stop the selected pattern of the dualchord via the button the sound doesn't stop all in all . it "hang"s on the last cord I play and the sound is continiously on the line. I only can stop the sound via the NerdScreen by selecting the order "Stop all sound". Any suggestion how to handle this, Thomas? It would be more comfortable and intuitiv to stop the sound over the button select.
These are oscillators and they got to keep running. That is what all oscillators do. You usually use at least an external VCA to stop the sounds (for example using the trigger output as the gate) or involve also an envelope.
You can stop all sounds also by pressing shift+stop with a stopped sequencer. (I usually press SHIFT+STOP Twice so everything stops).