• Added: Automations. 8 Automation slots with the modulation matrix to output the automators to several internal and external functions.
  Current Automators:    LFO, CV inputs. LFO automator with the following settings: Speed, Offset, Invert, Clock, Range, Waveform (Sinus, Triangle, Sawtooth, White and pinknoise), Bitrate, Phase. All automator settings can be manipulated from the FX column of a track. Also, several LFO settings can be manipulated by another automator slot: Speed, Range and Reset. The CV input automator got no settings yet (for next version). Automator destinations: Track 1..6: CV, MOD, Trigger Length (overrules the next trigger in length), Trigger Delay (overrules the next trigger delayed gate function), FX1..FX4 Overrule (overrules the next FX values), CV/MOD Glide+Steps, All probabilities, Step Overrule (experimental). Sample tracks 7,8: Pitch, Volume, Bitcrush, Distortion, Sample position, FX Overrule, All probabilities, Step overrule (experimental)
  

• Change: Trigger column overrules the auto-gating from notes. So if a note is filled in and a trigger (from trigger column) at the same step, then the trigger got high priority
  

• Added: Next Random FX overrule in FX column. The next FX value from destinations (0 = random fx column, 1..4 = FX 1..4) will be overruled by a random value.
  

• Added: Old projects from versions older than 1.16 can be loaded
  

• Added: time in sample pattern screen
  

• Added: Din-Sync24 output (for clock)
  

• Added: Edit steps (change in setup screen). Cursor jumps automatically the amount of steps further when inserting a new value with SHIFT + CURSOR-UP in the pattern screen. Be aware that this can be confusing when you are used to insert values with SHIFT + CURSOR-UP. Inserting new values without the steps jumping can be done with SHIFT + CURSOR-RIGHT. You can disable this function to get back as it used to be if the editsteps are 0.
  

• Added: OK button on the trigger column triggers the underlying trigger value
  

• Added: Current running table is visible in the pattern screen.
  

• Added: Table Stop command. Be aware, tables are not being stopped anymore by using a patch. Table stop is the value left of Table 00.
  

• Added: All tracks play (SHIFT + START) from inside a pattern (same like on the sequencer screen)
  

• Added: Simple Screensaver. (Enable in Setup Screen. 0 Seconds = Screensaver off)
  

• Fix: BRK in sample tracks works now as suppose to be in combination with probability
  

• Added: PAGE UP/DOWN in patch screen
  

• Added: Clone patch with SHIFT + OK on a current patch
  

• Added: Setting (setup screen) to automatically add also a trigger in the trigger column when inserting a note.
  

• Added: Sample offset FX
  

• Added: Note Prelisten when pressing OK on note (works also with SHIFT + CURSOR-UP/DOWN + OK)
  

• Added: Note insertion (note scale) on MOD column. Fast switch by using OK on the mod column swaps between 000, 800, C-0, C-4, C-8.
  

• Added: Screen wrap-around (enable in setup screen). Cursor swaps back to the begin/end of the screen up/down/left/right.
  

• Added: Setup function: Reset all values/settings on song stop.
  

• Added: Highlight rows. The row highlighting from the pattern screen can be changed in the setup screen (eg, 4 = every 4th row is highlightened)
  

• Added: Special FX command with multiple functions: Stop track after pattern ready, Stop track directly, Stop Song, Set/Reset clock output, Pulse clock output, Set/reset RESET output, Pulse Reset output, Reset all track current values, Reset all current values, Goto random position, Resync track, Resync All.
  

• Added: Modwheel input for live manipulation through MIDI (for MOD)
  

• Fix: Mute didn't affect the FX column well
  

• Added: Nerd Menu: Reset current Track values, Reset All current values, Resync Track, Resync All
  

• Added: Pattern Names. You can give each pattern a name now. (Add name in Nerd Menu on the pattern screen)
  

• Fix: Screen edit / key input inconsistencies
  

• Added: Trigger function 'FD' will toggle the trigger.
  

• Updated: Many small updates and fixes in the screens and background to get a smoother usability feeling and higher performance. Screen change is now much snappier. Removed many mini-glitches.
  

• Fix: Basenote didn't reset when a pattern/track was stopped manually
  

(09-17-2018, 03:24 PM)persi74 Wrote: I what versions is that one?i work on 1.16 rcs..i try to upgrade but i'can't ,after push button combination nerd seq say drive handle invalid..and reboot on rcs version..can you help me!...

Quote:If it says it couldn't find the SD-Card: Keep holding the buttons, it will work the next time for sure.

(09-17-2018, 03:33 PM)XORadmin Wrote:

(09-17-2018, 03:24 PM)persi74 Wrote: I what versions is that one?i work on 1.16 rcs..i try to upgrade but i'can't ,after push button combination nerd seq say drive handle invalid..and reboot on rcs version..can you help me!...

Quote:If it says it couldn't find the SD-Card: Keep holding the buttons, it will work the next time for sure.

(09-19-2018, 09:34 PM)mortimore Sneed Wrote: I have a problem w/the firmware update I have tried 8 or 9 times always the same result. I power down hold the buttons power up boom instant download wait till it ends hit shift get 2 white flashes then the cherries and still says version 1.4 I'm at a loss?

(09-19-2018, 09:46 PM)XORadmin Wrote:

(09-19-2018, 09:34 PM)mortimore Sneed Wrote: I have a problem w/the firmware update I have tried 8 or 9 times always the same result. I power down hold the buttons power up boom instant download wait till it ends hit shift get 2 white flashes then the cherries and still says version 1.4 I'm at a loss?

Did you put the new Firmware into the 'firmware' folder of the card?

Do you hold the correct buttons like with or before power on? SHIFT + COPY + CURSOR UP... it must enter the Bootloader mode.