+- XOR Userforum (https://xor-electronics.com/forum)
+-- Forum: Products (https://xor-electronics.com/forum/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://xor-electronics.com/forum/forumdisplay.php?fid=6)
+---- Forum: Nerdseq issue / bugreport (https://xor-electronics.com/forum/forumdisplay.php?fid=8)
+----- Forum: Beauty and less important bugs/glitches (https://xor-electronics.com/forum/forumdisplay.php?fid=16)
+----- Thread: Table Clock inconsistent with Loop Restart (/showthread.php?tid=256)
Table Clock inconsistent with Loop Restart - chapelier fou - 11-29-2018
Pattern : 16 step, just one note on step 00 and Table 00 for this step.
Table 00 : rows 00 to 07 no transpose. Rows 08 to 0F : 0C (one octave up). Internal Tick, Speed : 01, Loop restart.
This should sound like an octave jump played exactly 6 times by pattern, right ?
Very often (95% of the time) the first beat hits on the upper Octave (very shortly).
There must be something inaccurate with the Restart. (Endless and One shot mode work fine).
RE: Table Clock inconsistent with Loop Restart - XORadmin - 11-29-2018
OK, thanks.
I will be off to CV Freqs in London and can test it after the weekend.
RE: Table Clock inconsistent with Loop Restart - chapelier fou - 11-29-2018
Have fun there !
(EDIT : One Shot is buggy as well)
RE: Table Clock inconsistent with Loop Restart - XORadmin - 11-29-2018
It sounds to me that it is not always synchronised with the pattern table start. I will try to reproduce it and then we'll find out...