• Fix for the case when loading another project while one was playing which could cause a 1 BPM tempo. Sequencer stops now when loading another project.
  

• fixed bug in tables where a table in track 6 could cause trigger 1 to trigger
  

• changed in MOD column instead of using OK to switch between note and MOD values. Need SHIFT+OK from now
  

• Added prelisten function for MOD column now using the OK button. If both MOD - note and Note are filled in, then 2 notes can be prelistened.
  

• Bugfix: Delete marked Trigger changed MOD values next to it
  

• Bugfix: Midi recording if note on and off was on same step, then now a trigger of F0 is filled in instead of a note-off
  

• Added: Sample preview (In sample browser SHIFT + LEFT for output 7 and SHIFT + RIGHT for output 8, press again to stop pre-listening). Also very long samples (as in 'minutes') can be previewed, and that all also while playing (Is overruling the current sample track).
  

• Added: Preview of already loaded sample slots (SHIFT + LEFT for output 7 and SHIFT + RIGHT for output 8)
  

• Bugfix: Basenote from patches works now
  

• Added: Patch to FX columns
  

• Added: Table to FX columns
  

• Updated: Patches always update all inserted values for local CV/Gate tracks
  

• Fix: BPM display matches the actual timing now.  
  

• Updated: Live change values when editing patches removed
  

• Updated: Removed support for 24bit and 32bit Wavefiles. All standard PCM (non compressed) 8/16 bit Mono/Stereo wavefiles are supported.
  

• Added: DINSYNC Clock input (through clock and reset input)
  

• Added: Note plays when holding OK button and walking up/down -> Plays notes while browsing
  

• Added: For samples: Note plays + note browsing as well
  

• Added: Compact Sequencer function (SETUP SCREEN) Cleans up unused patterns and releases them again for new use
  

• Added: Superslow automator lfo speed mode
  

• Changed: Range for LFO better resolution (more fintuning for lower ranges)
  

• Added: Record from CV route to outputs directly, so you can hear what you record directly
  

• Fixed: Edit was still possible on some places even though edit was turned off
  

• Added: If Edit mode is OFF, allow live use of OK button in sequencer screen to temporary jump to the same step of another pattern (SHIFT+OK for the row)
  

• Fix: Fixed external start of pattern/row (through Midi or DINSYNC with shift button starts whole row, without shift only the 'selected' pattern)
  

• Added: Load / Save sampleblock. Allows to load and save all sample slots into / from a file.  
  

• Added: Load sampleblock directly from sequencer (LSMP fx command on sample tracks) for 'nearly' seemless replacement of all samples.
  
• Bugfix : When deleting marked values in the pattern screen with shifting up and something was filled in in the MOD column, the NerdSEQ could possibly crash.
  
• Bugfix : When after power on, playing the first sample + retriggering + probability could cause a crash.
  

(02-18-2019, 10:35 PM)mpiecora Wrote: This is amazing. Does the live pattern switching function have to be turned on or is it just- on?

Quote:"Additionally, if ‘Edit Mode’ is disabled, a special live play function allows to jump directly to the
same step on another selected pattern. By pressing the OK button (or SHIFT+OK for the whole
row) the sequencer will jump directly to the pattern where the cursor points to. Be aware that the
sequencer will still jump to the pattern that was suppose to play next after the ‘direct-jump’
pattern/s has been finished."

(02-18-2019, 10:45 PM)XORadmin Wrote:

(02-18-2019, 10:35 PM)mpiecora Wrote: This is amazing. Does the live pattern switching function have to be turned on or is it just- on?

Manual page 15  

Quote:"Additionally, if ‘Edit Mode’ is disabled, a special live play function allows to jump directly to the
same step on another selected pattern. By pressing the OK button (or SHIFT+OK for the whole
row) the sequencer will jump directly to the pattern where the cursor points to. Be aware that the
sequencer will still jump to the pattern that was suppose to play next after the ‘direct-jump’
pattern/s has been finished."

(02-19-2019, 10:39 PM)uniquepersonno2 Wrote: Having a bit of an issue with MIDI clock on this one, it sounds as if it sometimes skips sending a clock out so things clocked by MIDI from the nerdseq sometimes get out of rhythm.

(02-21-2019, 07:03 PM)uniquepersonno2 Wrote: Interesting. I'm only clocking the ES Drum Sequencer with it but I'm having lots of issues, didn't have any before updating. It seems to happen most when starting the clock initially.