+- XOR Userforum (https://xor-electronics.com/forum)
+-- Forum: Products (https://xor-electronics.com/forum/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://xor-electronics.com/forum/forumdisplay.php?fid=6)
+---- Forum: Nerdseq issue / bugreport (https://xor-electronics.com/forum/forumdisplay.php?fid=8)
+----- Forum: Beauty and less important bugs/glitches (https://xor-electronics.com/forum/forumdisplay.php?fid=16)
+----- Thread: *SOLVED* unstable trigger when value is "10" (/showthread.php?tid=38)
*SOLVED* unstable trigger when value is "10" - holo - 10-19-2017
sometimes it is gating?, not triggering
when using the shortest trigger available it sometimes seems to miss a trigger, but that might be the problem of the other device..
but in rare moments it seems to be gating, which looks and sounds very different ..
i ran the 16th trigger into visually indicating modules too and it happend about every half a minute.
trigger "20" is stable.
RE: unstable trigger when value is "10" - XORadmin - 10-19-2017
Do you use it in combination with the Note? Then use the KILL 0 command with it to avoid that the Note is gating.
Also trigger 10 is a really short trigger, could be indeed that your device is too slow for it....
But check like this first if you also use the note (Firmware 1.6):
C-4 -- -- 10 --- KILL 000
RE: unstable trigger when value is "10" - holo - 10-19-2017
I'm aware of it being too short for some devices but i was surprised about the Gate. It's not really a problem rather question if it is too short anyway.
KILL said it is 2BD .. at least recently. Is it available now?
RE: unstable trigger when value is "10" - XORadmin - 10-19-2017
- KILL for CV is there since forever
- KILL for samples is 2do
RE: unstable trigger when value is "10" - holo - 10-19-2017
(10-19-2017, 10:37 AM)XORadmin Wrote: - KILL for CV is there since forever
- KILL for samples is 2do
oops.. a beer induced bug in my testing routine.
RE: unstable trigger when value is "10" - XORadmin - 10-19-2017
Cheers