+- XOR Userforum (https://xor-electronics.com/forum)
+-- Forum: Products (https://xor-electronics.com/forum/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://xor-electronics.com/forum/forumdisplay.php?fid=6)
+---- Forum: Firmware / Manual (https://xor-electronics.com/forum/forumdisplay.php?fid=11)
+---- Thread: Release Candidate Firmware V1.20 RC5 (/showthread.php?tid=456)
RE: Lockup loading proj. with 1.20 RC - XORadmin - 08-05-2019
(08-05-2019, 04:39 PM)StateAzure Wrote: I'm getting a complete lockup during loading of one particular project (which I've included). I created the proj with 1.20 RC1. When it repeatedly continued to fail loading, I decided to upgrade to RC2, but still it doesn't load at all and locks on the load screen.
One time when I was trying to load this proj, I briefly saw an error that said something like 'NSA not assigned to track 4' ? (I think!) It didn't stay long, so I might be incorrect.
Is there anything that can be done about this project? I was beginning work on a really nice track! It was pretty basic though, only 3-4 tracks used
I actually moved it here away from the Bugreport as this is an unreleased / unstable version which shouldn't be reported in the official bugreports.
So can you add the project file so i can take a look sometime in the next days (sorry on vacation right now).
Can you also give some more information about the project? Did you use any expanders with it?
RE: Lockup loading proj. with 1.20 RC - StateAzure - 08-05-2019
(08-05-2019, 08:11 PM)XORadmin Wrote:(08-05-2019, 04:39 PM)StateAzure Wrote: I'm getting a complete lockup during loading of one particular project (which I've included). I created the proj with 1.20 RC1. When it repeatedly continued to fail loading, I decided to upgrade to RC2, but still it doesn't load at all and locks on the load screen.
One time when I was trying to load this proj, I briefly saw an error that said something like 'NSA not assigned to track 4' ? (I think!) It didn't stay long, so I might be incorrect.
Is there anything that can be done about this project? I was beginning work on a really nice track! It was pretty basic though, only 3-4 tracks used
I actually moved it here away from the Bugreport as this is an unreleased / unstable version which shouldn't be reported in the official bugreports.
So can you add the project file so i can take a look sometime in the next days (sorry on vacation right now).
Can you also give some more information about the project? Did you use any expanders with it?
Sorry about that.
Well now I see the problem. I can't attach the file, because it's empty..I just checked the original file on the SD card, and yep, showing as 0 kb. No wonder it wouldn't load! I have a whole bunch of projects on there all of which are showing file sizes, just not the one that's corrupt. I guess that's gone then.
Anyway, I was using only the MIDI expander and that was just to do some live midi recording. Everything was fine before I shut it down last night.
I should start using the backups option I suppose.
PS I think I had 3 tracks altogether. Every track was a Modular track, created by using live midi recording and had a bunch of live modulation that I entered in real-time using the mod wheel on my keyboard. That's really it. I didn't use any modFX or tables etc.
RE: Release Candidate Firmware V1.20 RC2 - shledge - 08-06-2019
Loving this firmware.
One thing that is annoying me at the moment, possible bug - pitch bend resets when I play a new note.
RE: Release Candidate Firmware V1.20 RC2 - XORadmin - 08-06-2019
(08-06-2019, 01:05 PM)shledge Wrote: Loving this firmware.
One thing that is annoying me at the moment, possible bug - pitch bend resets when I play a new note.
When is that? When recording, playing live or when just playing a sequence?
RE: Release Candidate Firmware V1.20 RC2 - shledge - 08-06-2019
Playing live mainly.
RE: Release Candidate Firmware V1.20 RC2 - XORadmin - 08-06-2019
(08-06-2019, 04:08 PM)shledge Wrote: Playing live mainly.
Playing live to a CV or a Midi track?
RE: Release Candidate Firmware V1.20 RC2 - Barney Rubble - 08-06-2019
I can jump in here - as I can see same issue - playing midi pitch wheel into cv track - note resets pitch bend.
I thought you were on holiday!!
If you start a an empty CV/modular pattern then pitch bend from midi input behaves as expected - if that helps
RE: Release Candidate Firmware V1.20 RC2 - grib - 08-06-2019
Hi, I installed 1.20 RC2 and loaded a save-file from an older version (1.16 I think).
In the Automate screen there are some un-allowed values for some automation destination slots (see screenshot) and when I try to adjust these values pretty soon I will get an error as shown. The Nerdseq locks up completely and doesn't respond to any keypresses.
If I clear the slot with DELETE it goes back to -- and I can then adjust it within the legal range with no problems.
RE: Release Candidate Firmware V1.20 RC2 - XORadmin - 08-06-2019
(08-06-2019, 07:51 PM)grib Wrote: Hi, I installed 1.20 RC2 and loaded a save-file from an older version (1.16 I think).
In the Automate screen there are some un-allowed values for some automation destination slots (see screenshot) and when I try to adjust these values pretty soon I will get an error as shown. The Nerdseq locks up completely and doesn't respond to any keypresses.
If I clear the slot with DELETE it goes back to -- and I can then adjust it within the legal range with no problems.
When the error comes then it is a detected crash.
Please add the project file so i can check where the weird automation values come from...when i’m back.
RE: Release Candidate Firmware V1.20 RC2 - shledge - 08-07-2019
(08-06-2019, 05:36 PM)XORadmin Wrote:(08-06-2019, 04:08 PM)shledge Wrote: Playing live mainly.
Playing live to a CV or a Midi track?
CV track. I haven't tried a MIDI track yet.