+- XOR Userforum (https://xor-electronics.com/forum)
+-- Forum: Products (https://xor-electronics.com/forum/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://xor-electronics.com/forum/forumdisplay.php?fid=6)
+---- Forum: Nerdseq issue / bugreport (https://xor-electronics.com/forum/forumdisplay.php?fid=8)
+----- Forum: Beauty and less important bugs/glitches (https://xor-electronics.com/forum/forumdisplay.php?fid=16)
+----- Thread: midi clock setup -> reset (/showthread.php?tid=83)
midi clock setup -> reset - holo - 01-05-2018
hi, i was a bad boy
power up - project setup - clock to midi slave - start midi sequencer (nerdseq still in setup view) -> nerd reset
fw 1.10
tried a few ways with a pattern available and it behaved flawless.. doesn't seem to be a real problem then.
another clock related thing is that the clock output stays quiet now after starting midi when no pattern is available. it would be nice to have it started.
RE: midi clock setup -> reset - XORadmin - 01-15-2018
I will fix the reset issue, which is not a too big issue in my view as it only applies to never touched totally empty stage after power on.
But will be fixed anyway.
Both issues will be fixed in one of the coming versions.
RE: midi clock setup -> reset - holo - 01-15-2018
since you are hanging out in the midi department right now fixing minor stuff, i got another one for you! shameless me.
i remember you stated this at some point but i totally forgot about it..
recently i connected the midi module (acquired new rackspace) and sometime later i was wondering why some drums started to play along with my midi controlled synth..
so i learned (again) that nerdseq reacts to incoming midi notes .. but i couldnt turn it off easily!
thats my non-urgent feature request: option to turn off midi note processing (but not the clock)
RE: midi clock setup -> reset - XORadmin - 01-19-2018
I need to make a whole Midi-Routing functionality...will be in the future.
RE: midi clock setup -> reset - XORadmin - 03-07-2018
(01-15-2018, 04:45 PM)holo Wrote: since you are hanging out in the midi department right now fixing minor stuff, i got another one for you! shameless me.
i remember you stated this at some point but i totally forgot about it..
recently i connected the midi module (acquired new rackspace) and sometime later i was wondering why some drums started to play along with my midi controlled synth..
so i learned (again) that nerdseq reacts to incoming midi notes .. but i couldnt turn it off easily!
thats my non-urgent feature request: option to turn off midi note processing (but not the clock)
That is added in Firmware V1.13 and newer.
RE: midi clock setup -> reset - shledge - 03-28-2018
Notice this still causes my nerdseq to reset sometimes - I'm on 1.14.
RE: midi clock setup -> reset - XORadmin - 03-31-2018
Yes it is not fixed yet. I had it as a minor bug since it only happens directly after startup without any data filled in.