+- XOR Userforum (https://xor-electronics.com/forum)
+-- Forum: Products (https://xor-electronics.com/forum/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://xor-electronics.com/forum/forumdisplay.php?fid=6)
+---- Forum: General Questions (https://xor-electronics.com/forum/forumdisplay.php?fid=17)
+---- Thread: Cheat Sheet (/showthread.php?tid=865)
Cheat Sheet - Kubase - 10-30-2020
Hi everyone - new NerdSEQ owner here (mind blown).
I've made a little cheat sheet (attached). Very basic and I will add to it but thought I'd share as is.
RE: Cheat Sheet - Demure - 10-30-2020
Sweet, thanks for sharing!
RE: Cheat Sheet - Barney Rubble - 10-30-2020
(10-30-2020, 10:15 AM)Kubase Wrote: Hi everyone - new NerdSEQ owner here (mind blown).
I've made a little cheat sheet (attached). Very basic and I will add to it but thought I'd share as is.
Hey Kubase - Nice work on the cheat sheet I like the layout.
![[Image: thumbsup.png]](https://xor-electronics.com/forum/images/icons/thumbsup.png){kind=icon}
Shift+Down+Delete in the Sequencer screen is not working here either and I can't remember if it ever did work.
Shift+Down+Copy is a workaround of sorts but involves marking/copying first.
Thomas can you confirm if this a bug or not?
RE: Cheat Sheet - XORadmin - 10-30-2020
Very nice! Housestyle :-)
Some things to add:
Transport:
SHIFT+UP+START (that order): Mute/Unmute Track
SHIFT+DOWN + START: Solo/Unsolo Track
Sequencer Screen:
PATCH : Enter Current Values Screen
OK: Enter pattern (if on a pattern number + setting enabled)
SHIFT+Delete: (in empty spot) Insert Stop command
Pattern General:
PATCH : Enter Current Values Screen (except for CV16 track)
SHIFT+OK (Patch selected): Clone Patch
Additional Trigger16 Pattern:
Drummatrix SHIFT+ OK + Cursor Left/Right: Insert and increas/decrease euclidean drumtriggers in selected column
Drummatrix SHIFT+ OK + Cursor Up/Down: Shift drumtrigger points Up/Down with wrap around for selected column
Additional Midi Pattern:
SHIFT+OK On velocity: Get to extra features for local CV/Gate outputs
Additional CV16 Pattern:
PATCH : Go to Glide/Modulator settings on the right
SHIFT+OK (on 'note column'): Cycle through Notes, Modulators, Triggers, CV Values
--
If not on Patch selection or CV16 pattern screen:
PATCH : Current Values screen (toggle between Current Values and Track Setup screen)
Automate Screen:
OK on play/stop column: Start/Stop automator
UP/DOWN: Go to the upper (slots/modulationmatrix) or lower part (modulatorsettings)
Automate Button: Enter Envelope Screen (toggle between automator and envelope screen)
Project Screen:
OK: (On Transpose, with and without shift) sets the transpose directly.
--
SHIFT+NERD: (different with and without marked values)
Open context menu with special functions (like transpose, sample load, colours, naming...). (Works for Sequencer, Pattern, Table screens)
--
Track Setup Screens:
UP/DOWN: Browse through settings
I'm sure there is more. It looks quite much, but basically these are mostly always the same combinations for navigation/value changing etc.
RE: Cheat Sheet - XORadmin - 10-30-2020
(10-30-2020, 02:11 PM)Barney Rubble Wrote:(10-30-2020, 10:15 AM)Kubase Wrote: Hi everyone - new NerdSEQ owner here (mind blown).
I've made a little cheat sheet (attached). Very basic and I will add to it but thought I'd share as is.
Hey Kubase - Nice work on the cheat sheet I like the layout.
Shift+Down+Delete in the Sequencer screen is not working here either and I can't remember if it ever did work.
Shift+Down+Copy is a workaround of sorts but involves marking/copying first.
Thomas can you confirm if this a bug or not?
I can confirm, i was and am not sure if it should be only for the column or for the whole row...so i left that open and indeed this can be done with marking..
RE: Cheat Sheet - PatchesAdam - 10-30-2020
(10-30-2020, 10:15 AM)Kubase Wrote: Hi everyone - new NerdSEQ owner here (mind blown).
I've made a little cheat sheet (attached). Very basic and I will add to it but thought I'd share as is.
I love this. Printing it.
RE: Cheat Sheet - Kubase - 10-30-2020
Good input - I'll keep chipping away at it and post here.
RE: Cheat Sheet - Kubase - 10-31-2020
Version 2 attached!
RE: Cheat Sheet - emilng - 10-31-2020
(10-31-2020, 10:39 AM)Kubase Wrote: Version 2 attached!
This is very handy! Thanks for doing this!
RE: Cheat Sheet - clak - 11-01-2020
(10-31-2020, 10:39 AM)Kubase Wrote: Version 2 attached!
Thank you!