Controlling vca via envelopes - help

[XORadmin]

Your attack is set to the slowest.

Use the same values as the second envelope and you will find out :-)

And delete the envelope commands in the FX lane, these are not needed when the source is 'Gate'.
When the first note comes, then the gate is set automatically (if auto gate is turned on, else use a Trigger with FE) on the note row.
Before the 2nd note you need to either add a note off or a trigger 00 because else there will be no proper release phase of the envelope (except for one-shot)

Like this: https://photos.app.goo.gl/4gbDrB8Airh4YM6u7 ?

Currently its now really quiet and still no envelope. Sorry to be frustraiting..

OK, just more to cover:
You are using track 2. Be sure your envelope is also using Gate 2 and then the MOD you want to use.
The note off might be too short before the new note to finish the release phase. And E-3 doesn't have a note off.

Why is there a table running and what does it do?
Do you see the envelope getting into its' phases (red lines in the envelope?).

Don't worry, they work. There is just something that we might miss or can't see in your sequence.