Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware V1.16
#23
(10-03-2018, 09:12 PM)XORadmin Wrote:
(09-26-2018, 06:42 AM)XORadmin Wrote:
(09-26-2018, 01:46 AM)mortimore Sneed Wrote:
(09-20-2018, 07:46 PM)XORadmin Wrote:
(09-20-2018, 06:57 PM)mortimore Sneed Wrote: First off let me answer your questions yes the .Hex file was in the firmware folder. But today I checked the folder and it appeared  to be empty so I put a  .Hex  file in it and it then showed 2 pages but still showed 2.22 in the folder. But today instead of the download blue box I get a red box and it says 
"Drive handle invalid try again"  and yes I am hollding the three buttons down shift +copy+ cursor up  on power. What can I say its beyond me.

I don't get it. First the NerdSEQ can't delete any files, so i am not sure why the firmware folder was empty.
Also i don't understand the '2 pages / showed 2.22 in de folder'.

If the correct file 'nerdseq.hex' is in the firmware folder, then the startup should recognise the file for flashing. If there is the red box in the first place, keep holding the buttons until it has restarted by itself again, if they are still error messages after like 2-3 continous startups, it might make sense to re-format the SD card (backup the content before, format and copy back) or even replace it.
Well I have tried every sugestion you gave and no luck. I bought a sandisc  32g card put the software on and nothing.Formated both cards  nothing put the card in at every micro-angle to make sure everything was touching well you get the idea. I have not seen tv since I got this. This should have take 20 min tops i'm on 20 hrs. I need some sage like advice Mr. Wizard.
Hey i am really sorry to hear this. It should be a job of 2 minutes normally and i expect it to work.( Because thats how i put the software on your NerdSEQ in the first place).
I think a 32GB card could also be a problem.(Doesn't have to) I would normally recommend 1 - 8 GB cards formated with either FAT or FAT32.
I'll get in touch with you to solve your problem.

I just checked about the Invalid Drive Handle Error message and it turns out thats the message if the NerdSEQ can't find the firmware file 'nerdseq.hex' in the firmware folder on the SD Card. And in your case it is most probably cause it was saved as 'nerdseq.hex.txt' which some browsers seem to do automatically if not changed manually.
I will add that information also to the manual.

Thomas nailed it down for me. Big Grin  It took about a week to fix the problem and he was there every day helping out. I geuss I copy and pasted so much that I ended up with .txt on my hex file and it took a while to nail it down. Most of it was my fault I lacked the basic pc skills to perform the task that thomas needed to get the process rollin but every day I would wake up and find an email from the land of xor he finally had to send a zip file  to me with every thing there in order cleared the sd card and put all the new info on in the right order two minutes later I was doin the happy dance. Cool So if your having trouble     there is probably an easy answer unless you have never compressed a file or used a zip file before (Guilty)
Reply


Messages In This Thread
Firmware V1.16 - by XORadmin - 09-14-2018, 01:19 PM
RE: Firmware V1.16 - by RandomNerd - 09-14-2018, 05:34 PM
RE: Firmware V1.16 - by Odan - 09-14-2018, 09:15 PM
RE: Firmware V1.16 - by persi74 - 09-17-2018, 03:24 PM
RE: Firmware V1.16 - by XORadmin - 09-17-2018, 03:33 PM
RE: Firmware V1.16 - by persi74 - 09-17-2018, 03:40 PM
RE: Firmware V1.16 - by mortimore Sneed - 09-19-2018, 09:34 PM
RE: Firmware V1.16 - by XORadmin - 09-19-2018, 09:46 PM
RE: Firmware V1.16 - by XORadmin - 09-20-2018, 03:17 PM
RE: Firmware V1.16 - by mortimore Sneed - 09-20-2018, 06:57 PM
RE: Firmware V1.16 - by XORadmin - 09-20-2018, 07:46 PM
RE: Firmware V1.16 - by mortimore Sneed - 09-26-2018, 01:46 AM
RE: Firmware V1.16 - by XORadmin - 09-26-2018, 06:42 AM
RE: Firmware V1.16 - by XORadmin - 10-03-2018, 09:12 PM
RE: Firmware V1.16 - by mortimore Sneed - 10-04-2018, 06:02 PM
RE: Firmware V1.16 - by persi74 - 09-21-2018, 05:16 AM
RE: Firmware V1.16 - by XORadmin - 09-21-2018, 06:24 AM
RE: Firmware V1.16 - by note! - 09-25-2018, 03:57 PM
RE: Firmware V1.16 - by XORadmin - 09-25-2018, 05:27 PM
RE: Firmware V1.16 - by note! - 09-25-2018, 08:10 PM
RE: Firmware V1.16 - by XORadmin - 09-25-2018, 08:45 PM
RE: Firmware V1.16 - by note! - 09-26-2018, 08:25 PM
RE: Firmware V1.16 - by XORadmin - 09-27-2018, 11:58 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)