Posts: 24
Threads: 5
Joined: Feb 2019
Reputation:
0
04-25-2019, 04:07 PM
(This post was last modified: 04-25-2019, 04:18 PM by LostForWords.)
(04-25-2019, 04:04 PM)XORadmin Wrote: (04-25-2019, 03:23 PM)LostForWords Wrote: (04-25-2019, 02:55 PM)XORadmin Wrote: (04-25-2019, 02:49 PM)LostForWords Wrote: How do you set the note lengths in a MIDI pattern? I'm probably being an idiot but I can't see any settings like the trigger value on a modular track. I'm setting up some notes and each one plays until the next note in that lane.
Just like with all the other tracks with either a note off or via the kill command. While Kill is in the FX section, note off can be archieved by deleting an empty field or the lowest note that you can set (One below C-0).
Please check the manual for it. This is stuff you really need to know to get everything out of the NerdSEQ. Using the trigger commands for the CV/Gate tracks is just one possibility to decide for Note / Gate length.
I'm fairly new to Nerdseq and to date have been using trigger length with my style of music. I will brush up on the other options. In this case I'd recorded some notes in from Marbles with just the CV-note input and manually added velocity values. I missed one so there was a note with no velocity. It was stealing and holding one of the Peak's voices each time it hit that note so I was getting never ending notes. Should a velocity be forced in such a recording case where note values are being recorded in over CV not MIDI? I can't add a note manually without a velocity value. MIDI appears to treat such a note (no velocity) as a forever note.
OK i see, i think it doesn't really make sense to record without using the gate. Midi doesn't know such a thing like note change. And thats what you actually do with only CV changings. However, i expect it to fill in a 7f as velocity anyway, but it seems like it doesn't do it.
Also with Midi (and thats with Midi in general), a note value has always also velocity information. Thats why you can't fill in a note manually without a velocity value. However, it looks like a missing velociy causes a illegal Midi note which causes to steal a peaks voice. I will fix that.
So for proper use: Record best with the gate, because then you get the note-off automatically. When recording from CV into midi, you manually got to fill in your velocity values until i fixed it. Thanks for the little bugreport
No problem, I was just typing an edit to say when I go to edit the velocity from -- it starts at FE and works down so also when left at a value higher than 7F it causes problems. I'll know to avoid this now and the fix will sort it later.
Another small related bug : when CV input 1 and 2 (note and trigger) are directed to a Midi track the note value is going in to Note 1 and the trigger value is going in on Note 3! I know you'll fix Have a good Superbooth!
Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
(04-25-2019, 04:07 PM)LostForWords Wrote: (04-25-2019, 04:04 PM)XORadmin Wrote: (04-25-2019, 03:23 PM)LostForWords Wrote: (04-25-2019, 02:55 PM)XORadmin Wrote: (04-25-2019, 02:49 PM)LostForWords Wrote: How do you set the note lengths in a MIDI pattern? I'm probably being an idiot but I can't see any settings like the trigger value on a modular track. I'm setting up some notes and each one plays until the next note in that lane.
Just like with all the other tracks with either a note off or via the kill command. While Kill is in the FX section, note off can be archieved by deleting an empty field or the lowest note that you can set (One below C-0).
Please check the manual for it. This is stuff you really need to know to get everything out of the NerdSEQ. Using the trigger commands for the CV/Gate tracks is just one possibility to decide for Note / Gate length.
I'm fairly new to Nerdseq and to date have been using trigger length with my style of music. I will brush up on the other options. In this case I'd recorded some notes in from Marbles with just the CV-note input and manually added velocity values. I missed one so there was a note with no velocity. It was stealing and holding one of the Peak's voices each time it hit that note so I was getting never ending notes. Should a velocity be forced in such a recording case where note values are being recorded in over CV not MIDI? I can't add a note manually without a velocity value. MIDI appears to treat such a note (no velocity) as a forever note.
OK i see, i think it doesn't really make sense to record without using the gate. Midi doesn't know such a thing like note change. And thats what you actually do with only CV changings. However, i expect it to fill in a 7f as velocity anyway, but it seems like it doesn't do it.
Also with Midi (and thats with Midi in general), a note value has always also velocity information. Thats why you can't fill in a note manually without a velocity value. However, it looks like a missing velociy causes a illegal Midi note which causes to steal a peaks voice. I will fix that.
So for proper use: Record best with the gate, because then you get the note-off automatically. When recording from CV into midi, you manually got to fill in your velocity values until i fixed it. Thanks for the little bugreport
No problem, I was just typing an edit to say when I go to edit the velocity from -- it starts at FE and works down so also when left at a value higher than 7F it causes problems. I'll know to avoid this now and the fix will sort it later.
Another small related bug : when CV input 1 and 2 (note and trigger) are directed to a Midi track the note value is going in to Note 1 and the trigger value is going in on Note 3! I know you'll fix Have a good Superbooth!
Yes thanks. Assume the CV to Midi recording to be unfinished.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 13
Threads: 4
Joined: May 2019
Reputation:
2
I am super interested in the idea of NerdSeq supplying my basic synth envelopes. Any idea when that might be coming? Regardless, NerdSeq is awesome!
Posts: 3
Threads: 0
Joined: Jun 2018
Reputation:
0
Hi oI iI’ve been wondering about the envelopes as well. That’s one of the main reasons I chose the Nerdseq, among others of course.
Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
(05-24-2019, 06:41 PM)sascha12 Wrote: Hi oI iI’ve been wondering about the envelopes as well. That’s one of the main reasons I chose the Nerdseq, among others of course.
Yes they will be there...but the list is big and time is short. I will do my best to get it ready for the automators asap.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 34
Threads: 8
Joined: Dec 2017
Reputation:
0
First of all a major thanks for this update Just a quick question (maybe someone knows already): Is it possible to transpose an -/+ an octave using the live TP functions? Would be extremely helpful, as one wouldn't have to use an external octave-shift module
Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
You can simply transpose all from the project menu. Shift up/down as usual for an octave and left/right for a semi-note.
Though, this update is already several months old :-)
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 34
Threads: 8
Joined: Dec 2017
Reputation:
0
(08-06-2019, 02:09 PM)XORadmin Wrote: You can simply transpose all from the project menu. Shift up/down as usual for an octave and left/right for a semi-note.
Though, this update is already several months old :-)
Thanks! That one I know, although it would be mighty handy if it would be possible to transpose per octave. Then a simple precision adder could be patched into any of the inputs, and this way it would be incredibly easy to manually transpose separate tracks one octave up/down.
Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
(08-06-2019, 02:33 PM)Mat Wrote: (08-06-2019, 02:09 PM)XORadmin Wrote: You can simply transpose all from the project menu. Shift up/down as usual for an octave and left/right for a semi-note.
Though, this update is already several months old :-)
Thanks! That one I know, although it would be mighty handy if it would be possible to transpose per octave. Then a simple precision adder could be patched into any of the inputs, and this way it would be incredibly easy to manually transpose separate tracks one octave up/down.
I think you’d try the latest V1.20 release candidate then. Because with it you could do this i think.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 34
Threads: 8
Joined: Dec 2017
Reputation:
0
(08-06-2019, 02:46 PM)XORadmin Wrote: (08-06-2019, 02:33 PM)Mat Wrote: (08-06-2019, 02:09 PM)XORadmin Wrote: You can simply transpose all from the project menu. Shift up/down as usual for an octave and left/right for a semi-note.
Though, this update is already several months old :-)
Thanks! That one I know, although it would be mighty handy if it would be possible to transpose per octave. Then a simple precision adder could be patched into any of the inputs, and this way it would be incredibly easy to manually transpose separate tracks one octave up/down.
I think you’d try the latest V1.20 release candidate then. Because with it you could do this i think.
Yesss, i did, and it's awesome . However, i was wondering if next to the option of live transposing tracks per semitone, there would be also the possibility of transposing octaves. But i couldn't find it, so i guess it's not (yet) implemented. Right now i'm using an O&C for that purpose, running the cv out of the Nerdseq into the O&C, and transpose octaves using channels 2 and three of MN Maths. Thought it might work to run that into the live input and look for an octave transpose in the Nerdseq, but couldn't find it
|