[NO BUG] Connected Octatrack stopping by itself
|
[NO BUG] Connected Octatrack stopping by itself
|
11-08-2021, 01:03 AM
I have not installed the debug firmware yet. But interestingly, I was running my rig and I dropped the BPM from 112bpm to 32bpm. The Octatrack soon stopped, and NOTHING showed up in the midi monitor. Through the course of stopping, starting and running a sequence I will see plenty of events from the Analog Rytm and others. But this stop occurred with nothing appearing in recorded midi events.
11-09-2021, 08:12 AM
Latest experiment: I started a sequence at 32 bpm and then disabled transport receive on the OT. The sequence stopped running within a few minutes, and nothing appeared in midi monitor.
11-09-2021, 09:27 AM
(11-09-2021, 08:12 AM)mntbighker Wrote: Latest experiment: I started a sequence at 32 bpm and then disabled transport receive on the OT. The sequence stopped running within a few minutes, and nothing appeared in midi monitor. Can you use the test firmware so I can check what is sending out. Seeing from what I ready until now I guess it is either a bug in the octatrack or your octatrack got an issue. But my logs next to yours can clarify it.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help! 
I’ve been meaning to try to repro mntbighker’s tempo change behaviour but yesterday was nutso busy and today may be as well. I should be able to try out the latest 32 bpm / transport receive experiment easily enough, though. I’ll let you know what happens.
(11-02-2021, 04:39 PM)mntbighker Wrote: The NS is providing midi clock to Octatrack and Analog Rytm. Can you give us a rundown of the involved physical MIDI connections? Active/passive splitting, thru jacks or boxes, MIDI processors, etc? (11-09-2021, 08:12 AM)mntbighker Wrote: Latest experiment: I started a sequence at 32 bpm and then disabled transport receive on the OT. The sequence stopped running within a few minutes, and nothing appeared in midi monitor. Was disabling transport receive the one and only change? Was/is clock receive enabled? Oh, and what is your TURBO setting?
11-09-2021, 06:31 PM
(11-09-2021, 04:10 PM)mvdirty Wrote: Can you give us a rundown of the involved physical MIDI connections? Active/passive splitting, thru jacks or boxes, MIDI processors, etc? It was the only change. Clock receive is enabled. I believe Turbo is enabled but not shown as active. I'll have more time Thurs. - Sun. to tinker.
11-12-2021, 12:59 AM
Latest experiment… ran it at 32 and stopped fairly soon. Ran at 42 and same story. Ran at 52 and after 12 hours no stops.
11-12-2021, 06:22 AM
Here is some stuff from the midi monitor, though I'm not getting stoppages at 52bpm.
14:45:05.315 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 14:45:06.123 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:34:41.584 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:34:42.292 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:34:42.980 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:34:51.313 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:34:52.022 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:34:52.710 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:35:24.721 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:35:25.520 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:38:40.031 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:38:40.840 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:39:06.684 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:39:07.493 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:44:43.127 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:44:43.935 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:45:21.853 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:45:22.661 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:47:09.691 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:47:10.500 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:47:50.107 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:47:50.901 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:47:50.915 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7 21:50:53.523 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 00 5D 60 F7 21:50:54.332 From MIDI In SysEx Unknown Manufacturer 10 bytes F0 00 21 27 19 14 01 3B 40 F7
11-12-2021, 08:18 AM
(11-12-2021, 06:22 AM)mntbighker Wrote: Here is some stuff from the midi monitor, though I'm not getting stoppages at 52bpm. This is not data from the NerdSEQ. The NerdSEQ doesn't send SysEx messages except once for the launchpad integration if enabled. And even then, the data is very different to your log.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
11-12-2021, 03:36 PM
Given Thomas’ latest reply just above, I’m inclined toward dragging the thread back to this question from a few days ago:
Can you give us a rundown of the involved physical MIDI connections? Active/passive splitting, thru jacks or boxes, MIDI processors, etc?
11-13-2021, 08:33 PM
(This post was last modified: 11-13-2021, 08:35 PM by mntbighker.)
(11-12-2021, 03:36 PM)mvdirty Wrote: Given Thomas’ latest reply just above, I’m inclined toward dragging the thread back to this question from a few days ago: Nerseq OUT -> Erica midi box IN Erica OUT -> Intellijel 1U midi IN (currently not used for CV or clock) Erica OUT -> Disting EX IN (currently not used in any patterns) Erica OUT -> Octatrack IN (master mix fed through ES-9 to PC via USB, then routed to Motu for monitoring via VCV Rack mixer) Erica OUT -> Analog Rytm IN Erica OUT -> Motu IN -> USB-C -> Mac (midi monitor software) Everything is clocked by Pam's (x24) -> Nerdseq clock/reset IN (Mod.Clock24) Nerdseq Reset OUT -> Pam's run input Nerseq Midi clock OUT (DIN-Sync24) Keep in mind the stoppages exist with nothing but Nerdseq OUT to Octatrack IN. |
|
« Next Oldest | Next Newest »
|
