Hertz/Volt

[MidiSlave]

Hi nerds, 

I'm wondering if there is something up with the hertz/volt setting or i'm missing something or maybe both..

 I'm trying to sequence/play a Behringer K2 with the Nerdseq using CV/gate and I believe it receives Hertz/volt but i'm not having much success there. When I play the K2 directly via my keystep pro (set to Hertz/volt) the K2 pitch/octave range behaves as expected.

any ideas?

Thanks

Nathan

[XORadmin]

Hi nerds, 

I'm wondering if there is something up with the hertz/volt setting or i'm missing something or maybe both..

 I'm trying to sequence/play a Behringer K2 with the Nerdseq using CV/gate and I believe it receives Hertz/volt but i'm not having much success there. When I play the K2 directly via my keystep pro (set to Hertz/volt) the K2 pitch/octave range behaves as expected.

any ideas?

Thanks

Nathan

Hey Nathan,

what is your issue exactly. I just tested it and it produces the correct voltages when set to Hz/volt:
C-0 = 0,25V
C-1 = 0,5V
C-2 = 1V
C-3 = 2V
C-4 = 4V
C-5 = 8V
Offset switch to the right of course.

[MidiSlave]

Hi nerds, 

I'm wondering if there is something up with the hertz/volt setting or i'm missing something or maybe both..

 I'm trying to sequence/play a Behringer K2 with the Nerdseq using CV/gate and I believe it receives Hertz/volt but i'm not having much success there. When I play the K2 directly via my keystep pro (set to Hertz/volt) the K2 pitch/octave range behaves as expected.

any ideas?

Thanks

Nathan

Hey Nathan,

what is your issue exactly. I just tested it and it produces the correct voltages when set to Hz/volt:
C-0 = 0,25V
C-1 = 0,5V
C-2 = 1V
C-3 = 2V
C-4 = 4V
C-5 = 8V
Offset switch to the right of course.

Of course. The offset switch. 

Thanks for your patience and for responding so quickly. 

You’re a legend.

[XORadmin]

Ah haha....I was a bit worried as I don't have any gear to really test it but only could implement it theoretically and let it be tested by users.
Nice that it works!