[FIXED] Trigger 16 - Strange CV interaction

[Barney Rubble]

Hi Thomas, I've only had the Trigger 16 a few months else I would have found these bugs earlier. 

This bug affects Modular Tracks 1 and 2 CV outputs.  
Both tracks reset to O volts on Sequencer stop. Other tracks (3, 4, 5, 6,) CV outputs are not reset to 0 volts, they retain voltage of last note value 

Setup:  Reset FX on Seq Stop = ON
Project: Assign Sample Track 7 NSA1 :Trigger 16  (Affects Modular Track 1)
Project: Assign Sample Track 8 NSA1 :Trigger 16  (Affects Modular Track 2)

Create New Pattern 00, add CV Note C4. 
Add pattern to Tracks 1 through 6 - Start sequencer then Stop Sequencer - Tracks 1 and 2 CV are at 0 volts Tracks 3, 4, 5, 6, reflect C4 voltage.

Set - Reset FX on Seq Stop = OFF  and Tracks 1 and 2 CV are restored to normal behaviour
Assign Trigger 16 to Modular Tracks rather than Sample tracks and similarly problem is resolved  

best
b

[XORadmin]

Strange side effect. I’m going to check it but after the weekend. Thx

[XORadmin]

Found and solved for the next release candidate.

[Barney Rubble]

Found and solved for the next release candidate.

Confirmed - 1.26 RC3 fixed problem.

Many thanks Thomas

b