Firmware V1.28 Test Version

[mgd]

Is there going to be a way to save and load these sheets of mappings?  Does this already exist and i'm missing it?

You have read the very first post in this thread?

Thomas explicitly write:

- there will be mappings import/export in the final version (before you ask)

HTH,
Michael

---

Anyone manage to do something musical with it? Here is some idea I can’t succeeded:
- sample and hold listening to a lfo and sending note based on a clock division

Assuming the LFO is in Automator Slot 0:
Left side (Source) AUTM SLT0
Right side (Destination) wherever you want it to go, e.g. SETV V  A or CV [PTCH|NOTE] <output>
The logic for clock division is a bit trickier. You can trigger it from inside your pattern via XMAP or you need to do clock management "by hand" which probably is less desirable.

- same but based on trigger/CV ON of a pattern

Left side (Source) CV <whevever that pattern is writing to>
Rest see above

- condition to launch a pattern once

I haven't tried this but I guess it is
TRCK TRK1 PROW on the destination side and whatever provides a proper value, e.g.
VAR  #  A SRC as the source an VAR A would hold the pattern row number

In general playing around does help a lot. Don't forget, this isn't the released product, i.e. there's not yet a written manual etc.

HTH,
Michael