Mapping Discussion

[XORadmin]

Right if you use CV in as a value then you would send 4095 clocks/triggers to the track if for example 000/FFF would be the result.
What you need to do is have the CV input in one row and in another row a function which would take care that for example only 0 or 6 is being send (6 clocks/ticks which would match a normal groove)
One option would be the pass command:

Code:

CALC PASS 00=6 > TRK TRK1 TICK

Where 00 is the row of the CV input.

This would then send 6 ticks once the CV goes high.

OK I can see what goes wrong here and why nothing is executing. It does execute though if you only add 1 tick instead of 6 (but then you got to do that 6 times to progress to the next step).
I go to change the execution a bit and it will be fine, no matter how many ticks are being added.