Release Candidate 1 Firmware V1.16 (RC6 UPDATE)

[XORadmin]

I used the same project, blank projects, played with the setting on and off, etc. same result

I’m gonna check it. Still strange that it works well with the analog rytm.

[XORadmin]

I used the same project, blank projects, played with the setting on and off, etc. same result

I’m gonna check it. Still strange that it works well with the analog rytm.

So that one is clear now. It turned out to be a general problem with Elektron gear and the latest RC. I already fixed it and it will be working well in the release version.

[shledge]

MIDI to CV seems to be buggy. When sending notes, sometimes it can't handle it and seems to stop any MIDI activity on that channel (usually with the red indicator permanently on). Only way to fix it is to restart, but it doesn't stop the problem from happening again.

[shledge]

Also noticed the issue regarding recieving MIDI clock.

If it gets MIDI clock straight from my BSP, it works flawlessly.

If the BSP is passing through MIDI clock from the DAW, it will start, but all patterns on the sequencer screen stop after the first note. It also won't forward MIDI clock from the expander's MIDI out. However... if I go into a pattern and then start MIDI clock, then all patterns on the sequencer screen will play properly.

I can also get it to work as expected if I make the DAW send SPP, but it's not ideal as some of my other gear will refuse to start unless SPP is off.

I can confirm it worked fine in 1.14.

[XORadmin]

Also noticed the issue regarding recieving MIDI clock.

If it gets MIDI clock straight from my BSP, it works flawlessly.

If the BSP is passing through MIDI clock from the DAW, it will start, but all patterns on the sequencer screen stop after the first note. It also won't forward MIDI clock from the expander's MIDI out. However... if I go into a pattern and then start MIDI clock, then all patterns on the sequencer screen will play properly.

I can also get it to work as expected if I make the DAW send SPP, but it's not ideal as some of my other gear will refuse to start unless SPP is off.

I can confirm it worked fine in 1.14.

Yes this is fixed as mentioned in the post before. I just updated to RC6 so you can confirm it also for the BSP.

[XORadmin]

MIDI to CV seems to be buggy. When sending notes, sometimes it can't handle it and seems to stop any MIDI activity on that channel (usually with the red indicator permanently on). Only way to fix it is to restart, but it doesn't stop the problem from happening again.

I assume thats with the latest RC5? Also do you have the same problems with the 1.14? What is your setup exactly where this happens? If it's with the BSP, it is known to produce hanging notes with older firmwares. (and it really looks like you got a hanging note issue)

[shledge]

MIDI to CV seems to be buggy. When sending notes, sometimes it can't handle it and seems to stop any MIDI activity on that channel (usually with the red indicator permanently on). Only way to fix it is to restart, but it doesn't stop the problem from happening again.

I assume thats with the latest RC5? Also do you have the same problems with the 1.14? What is your setup exactly where this happens? If it's with the BSP, it is known to produce hanging notes with older firmwares. (and it really looks like you got a hanging note issue)

It only receives MIDI clock from the BSP - it gets MIDI notes from my mio10 via Reaper. Likely it's having problems with Reaper.

Also noticed the issue regarding recieving MIDI clock.

If it gets MIDI clock straight from my BSP, it works flawlessly.

If the BSP is passing through MIDI clock from the DAW, it will start, but all patterns on the sequencer screen stop after the first note. It also won't forward MIDI clock from the expander's MIDI out. However... if I go into a pattern and then start MIDI clock, then all patterns on the sequencer screen will play properly.

I can also get it to work as expected if I make the DAW send SPP, but it's not ideal as some of my other gear will refuse to start unless SPP is off.

I can confirm it worked fine in 1.14.

Yes this is fixed as mentioned in the post before. I just updated to RC6 so you can confirm it also for the BSP.

Awesome! I'll check and let you know.

[XORadmin]

MIDI to CV seems to be buggy. When sending notes, sometimes it can't handle it and seems to stop any MIDI activity on that channel (usually with the red indicator permanently on). Only way to fix it is to restart, but it doesn't stop the problem from happening again.

I assume thats with the latest RC5? Also do you have the same problems with the 1.14? What is your setup exactly where this happens? If it's with the BSP, it is known to produce hanging notes with older firmwares. (and it really looks like you got a hanging note issue)

It only receives MIDI clock from the BSP - it gets MIDI notes from my mio10 via Reaper. Likely it's having problems with Reaper.

Would you mind checking this also with V1.14?
And whats the setup exactly here. Is the BSP in the middle of the midi stream? (they are also reported problems with this with at least older firmwares, are you updated to the latest version?)

The thing is that i am not aware of hanging midi notes if the stream is correct. But of course, i got to know whats going on.

[shledge]

BSP isn't in the middle when Nerdseq recieves MIDI notes. It technically isn't even in the middle when sending MIDI clock (mio10 distributes MIDI clock from the BSP to everything else, including other USB MIDI devices).

[shledge]

I can confirm RC6 fixed the MIDI clock issue