Thread Rating:
  • 2 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Release Candidate 1 Firmware V1.16 (RC6 UPDATE)
(08-27-2018, 08:06 AM)XORadmin Wrote:
(08-26-2018, 09:48 PM)shledge Wrote: MIDI to CV seems to be buggy. When sending notes, sometimes it can't handle it and seems to stop any MIDI activity on that channel (usually with the red indicator permanently on). Only way to fix it is to restart, but it doesn't stop the problem from happening again.

I assume thats with the latest RC5? Also do you have the same problems with the 1.14? What is your setup exactly where this happens? If it's with the BSP, it is known to produce hanging notes with older firmwares. (and it really looks like you got a hanging note issue)

It only receives MIDI clock from the BSP - it gets MIDI notes from my mio10 via Reaper. Likely it's having problems with Reaper.

(08-27-2018, 07:44 AM)XORadmin Wrote:
(08-27-2018, 12:52 AM)shledge Wrote: Also noticed the issue regarding recieving MIDI clock.

If it gets MIDI clock straight from my BSP, it works flawlessly.

If the BSP is passing through MIDI clock from the DAW, it will start, but all patterns on the sequencer screen stop after the first note. It also won't forward MIDI clock from the expander's MIDI out. However... if I go into a pattern and then start MIDI clock, then all patterns on the sequencer screen will play properly.

I can also get it to work as expected if I make the DAW send SPP, but it's not ideal as some of my other gear will refuse to start unless SPP is off.

I can confirm it worked fine in 1.14.

Yes this is fixed as mentioned in the post before. I just updated to RC6 so you can confirm it also for the BSP.

Awesome! I'll check and let you know.

Messages In This Thread
RE: Release Candidate 1 Firmware V1.16 - by Odan - 07-24-2018, 09:11 PM
RE: Release Candidate 1 Firmware V1.16 (RC6 UPDATE) - by shledge - 08-27-2018, 09:18 AM
RE: Firmware Update Information - by shledge - 08-29-2018, 06:19 PM

Forum Jump:

Users browsing this thread: 1 Guest(s)