Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
For 99% the savefile will be fine for the final release
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 56
Threads: 17
Joined: Jan 2018
Reputation:
0
hellllll yessssssssssss. installing tonight
Posts: 37
Threads: 2
Joined: Jul 2018
Reputation:
0
I've been running the new firmware for a couple weeks and played a live set with it last Sunday and haven't encountered any bugs. Super happy with it. I could be using the automators more, but the new reset functions, special fx, and nerd menu functions are all amazing additions.
Posts: 9
Threads: 1
Joined: Jun 2018
Reputation:
0
08-16-2018, 05:38 PM
(This post was last modified: 08-16-2018, 05:42 PM by Joey.)
ok I think i've discovered a bug
I run my nerdseq midi slaved to an elektron analog rytm, which is slaved to my DAW (Ableton or Bitwig depending on my mood).
when i start playback from the analog rytm, the sequences start to play on the nerdseq as well.
If I press play in my DAW, slaving the rytm to its clock, the nerdseq starts counting time but the sequences don't actually start to play. The stop icon is also present instead of the play icon.
It was not like this in the previous OS, everything would play fine.
Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
08-16-2018, 06:06 PM
(This post was last modified: 08-16-2018, 06:10 PM by XORadmin.)
I’m sure it’s something with your setup. It seems like the DAW isn’t sending part of the Midi Data.
If it sends midi start/stop and the clock signal all should be fine. I think nothing changed with that since V1.0
Edit: reading more carefilly i am sure you DAW is only sending MIdi Time signals instead of the needed clock, and the analog rhyjm only passes them thru. Insyead if the analog rhythm is Master, it sends the needed clock data.
It’s a setting in your DAW or the thru section of the analogue rhythm.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 3.702
Threads: 125
Joined: Jul 2017
Reputation:
215
V1.14 works fine? And V1.16 not?
Can you cross check again with 1.16 then please, i will check it this weekend when i’m back.
Sorry if i’m wrong, it sounded obvious to me.
Gonna check it.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 9
Threads: 1
Joined: Jun 2018
Reputation:
0
yes I just double checked. 1.14 starts fine, 1.16 does not, i can upload some videos if you need
Posts: 9
Threads: 1
Joined: Jun 2018
Reputation:
0
I used the same project, blank projects, played with the setting on and off, etc. same result