Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware V1.04
#1
- Fixed an issue where loading a project with a big sample in it could cause problems. Project and Sample loading is improved.
- Added Page Up/Down functionality in the file browser


Attached Files
.hex   nerdseq.hex (Size: 1,2 MB / Downloads: 4)
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
#2
Some issues I have with 1.04:

Maybe I just did some things wrong. I'm still learning my way around the nerdseq Smile

- Sample browser shows just one page of samples (7 samples). Scrolling does not work - neither with cursor keys or page-up/down. But using one of those 7 samples works fine.

- Selecting submenues and menue-entries seems inconsistent. Some I can select with the OK button. Some through the cursor-right button. At least one menu is activated with the OK button, while the Manual says cursor-right activates it. Sadly i did not note which entries behaved which way (don't have the modular at home). I can do a proper bugreport later if that would be helpfull.

- The firmware upgrade went really smooth. But only after I tried it with a powercicle. I first tried it a few times with soft-reset, but could not press the button combination for the bootloader fast enough. Having the button combination allready pressed while powering on did the trick.

Other than that, everything I tried worked great Big Grin
Reply
#3
Hey, thanks for the report.

- I will check the sample browser again, but as far as i know it should work well. I added only beside the regular cursor up/down scrolling that it will also do pageup/page down with the up/down buttons

- Oh i got to check the button consistency for menus and submenus. In earlier versions i didn't have the OK button yet, so using the right button was to enter a sub-menu. I am sure forget one or another. Will fix that.

- ha yes...what i always do is also pressing the buttons already and then press right for the reset. (will change that to the OK button ;-) )
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
#4
For me page up page down in the sample browser work fine
Reply
#5
Hm, I'll check the sample browser again and will try a different microsd card if the problem persists.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)