Clock Output

[XORadmin]

My clock out voltage is also around 2.5V and doesn't trigger some of my modules like Wogglebug 2014, G8 and Rainmaker (I also have Knight's Gallop and Four Bricks Rook but out of the case atm). With others works fine (Varigate/Voltage Block, Noise Engineering, Mutables)

Just to confirm. How do you all measure? With a running clock and the O'tool voltage measuring? I expect you know that it shows only an average voltage which is with a running clock betwenn 0 and 5 volt = 2.5 volt.

To measure the clock output you need to set the clock (in the calibration menu) and measure without anything connected.
Or you could measure using the scope and see if the pulses of the running clock are around 5 volt.

Wobblebug doesn't count as it doesn't have a clock input but 8 Volt CV inputs -> see it's specs.
G8 should be set to unipolar to work well i guess. Rainmaker should be fine.