08-11-2018, 06:19 PM
I don't see any bug here, neither a crash, so i moved this to General Questions.
The clock voltage is around 5 Volt (a bit less here) which is totally fine. If the Mordax can't read it, then the settings in the Mordax have to be changed if possible.
Check the Doepfer Eurorack Specs for Clock / Trigger voltages.
Beyond 3 Volt should be treated as 'High' and below 1 Volt should be treated as 'Low'. Between is undefined and can be different with every module.
http://www.doepfer.de/a100_man/a100t_e.htm
The clock voltage is around 5 Volt (a bit less here) which is totally fine. If the Mordax can't read it, then the settings in the Mordax have to be changed if possible.
Check the Doepfer Eurorack Specs for Clock / Trigger voltages.
Beyond 3 Volt should be treated as 'High' and below 1 Volt should be treated as 'Low'. Between is undefined and can be different with every module.
http://www.doepfer.de/a100_man/a100t_e.htm
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!