Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Release Candidate Firmware V1.18 (RC3 UPDATE)
(02-06-2019, 08:39 PM)Barney Rubble Wrote: RC2 Some observations -:
1 Loading update the screen said something like SD Card was empty ? blah blah - but process continued and update was successful
2 Loaded project from RC1 and project loaded at 1bpm should have been 120bpm

Otherwise seems to be ok at the mo


1 - When only powering on the NerdSEQ, it can be that the SD card needs more time to start up. Just hold the buttons until it works well after a retry. That has nothing to do with RC2

2 - Are you sure? There is no difference in that from RC1. So if you saved in RC1 or older versions with 120 bpm, it should load with RC2 on 120 bpm. Or did you have external sync?
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile

Messages In This Thread
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - by XORadmin - 02-06-2019, 08:43 PM

Forum Jump:

Users browsing this thread: 1 Guest(s)