04-15-2019, 11:19 AM
A massive update just arrived. Adding some long awaited features, some unexpected stuff and fixes.
Also there is support for expanders included and the 'More Triggers 16' expander is available now, too. Check another thread here for that one.
Some important information before you update:
- make a backup of your SD Card and especially of your projects
- Old Projects from V1.18C and older can simply be loaded with the new version. Projects are not full downward compatible. So they might be some oddities if for expample saved with V1.19 and loading it with an older version V1.18 or earlier.
Here is a list of all the changes:
- Added: Midi sequencing:
- new pattern screen for 4 note polyphonic (+ Velocity) sequencing per track.
- Midi track support Notes, Pitchbend, Program Change, Polyphonic and Channel Aftertouch, CC, NRPN, flexible assignment of tracks and midi channels
- Midi notes can be played (cloned) on the local modular tracks (CV & Gate) if wanted.
- Most Midi commands can also be controlled by the automators
- Midi Probabilities: Note1, Note2, Note3, Note4, FX1, FX2, FX3
- Flexible Limiter for automation to Midi to reduce Midi data
- Added: NSA (Nerd Sound Adapter) Expander support. Beside the Midi expander 4 additional expanders can be connected which are then integrated in the sequencer.
- Expanders can be assigned to one or multiple tracks.
- Firmware updates of the expanders simply possible via the NerdSEQ. So new features are also possible for the expanders. As reliable as NerdSEQ firmware updating.
- Trigger 16 Expander:
- Provides 16 more Trigger/Gate outputs with all functions the local trigger outputs can do (eg. Trigger Length, Delayed Gate, Retriggering....)
- Binary output to be able to create some cool dividers
- Added Trigger 16 screens and sequencing + integration with all FX and Automators.
- Added drummatrix to allow classic drum sequencing with a good overview
- Square wave generation to trigger output from automator lfo
- Added Track Setup screen for all track types where Track specific settings can be done.
- Fixed: when pressing stop twice (or stop track from FX) could insert problems
- Fixed: Possible crash when starting the sequencer with an empty project from external clock
- Added: General Track Assign screen where tracks can be assigned to either Internal CV/Gate, Midi or to the available expanders.
- Added: FX command to start a pattern from the sequencer by position
- Fixed: Avoid Sample retriggering without a playing sample
- Added: SHIFT+DELETE on a Note column acts now as either 'Delete Note' or as 'Insert Note Off', no browsing down to lowest note needed anymore.
- Fixed: possible SEGA gamepad freeze situation after saving
- Fixed: Muting for sample patterns with odd groove settings
- Added: Start playing possible from all regular screens now
- Fixed: Compact pattern function with copy/paste clipboard
- Added: Copy paste between compatible pattern columns. Copy and paste can be from all notes to all notes, triggers to triggers, grooves to grooves from different pattern types. Content can now also be copied between the 2 sample parts.
- Added: Per track multiplier / divider. Dividers and Multipliers can be either live assigned to a track or via FX command.
Dividers/Multipliers: /32,/16,/8, /7,/6,/5,/4,/3,/2, *2,*3,*4,*5,*6,*7,*8)
- Visual updates: Sequencer screen layout, divider settings are shown per track, introduced VU meters for the samples, main clock indicator update
- Added: Colors on sequencer screen. Change the colors of special parts for fast recognition
- Enhanced: Longer filenames support for sample loader
- Added Enabling/Disabling of Midi clock output
So get it, check it out. Make videos. Spread the word. Buy the expander ;-)
But most important, enjoy!!!
The new firmware is attached here. This time also as .zip, so you need to unpack it into the firmware folder te be able to use it.
The updated manual is available in this thread:
https://xor-electronics.com/forum/showth...hp?tid=370
Please check the firmware update thread as well and read in the manual in case of any update issues.
Also there is support for expanders included and the 'More Triggers 16' expander is available now, too. Check another thread here for that one.
Some important information before you update:
- make a backup of your SD Card and especially of your projects
- Old Projects from V1.18C and older can simply be loaded with the new version. Projects are not full downward compatible. So they might be some oddities if for expample saved with V1.19 and loading it with an older version V1.18 or earlier.
Here is a list of all the changes:
- Added: Midi sequencing:
- new pattern screen for 4 note polyphonic (+ Velocity) sequencing per track.
- Midi track support Notes, Pitchbend, Program Change, Polyphonic and Channel Aftertouch, CC, NRPN, flexible assignment of tracks and midi channels
- Midi notes can be played (cloned) on the local modular tracks (CV & Gate) if wanted.
- Most Midi commands can also be controlled by the automators
- Midi Probabilities: Note1, Note2, Note3, Note4, FX1, FX2, FX3
- Flexible Limiter for automation to Midi to reduce Midi data
- Added: NSA (Nerd Sound Adapter) Expander support. Beside the Midi expander 4 additional expanders can be connected which are then integrated in the sequencer.
- Expanders can be assigned to one or multiple tracks.
- Firmware updates of the expanders simply possible via the NerdSEQ. So new features are also possible for the expanders. As reliable as NerdSEQ firmware updating.
- Trigger 16 Expander:
- Provides 16 more Trigger/Gate outputs with all functions the local trigger outputs can do (eg. Trigger Length, Delayed Gate, Retriggering....)
- Binary output to be able to create some cool dividers
- Added Trigger 16 screens and sequencing + integration with all FX and Automators.
- Added drummatrix to allow classic drum sequencing with a good overview
- Square wave generation to trigger output from automator lfo
- Added Track Setup screen for all track types where Track specific settings can be done.
- Fixed: when pressing stop twice (or stop track from FX) could insert problems
- Fixed: Possible crash when starting the sequencer with an empty project from external clock
- Added: General Track Assign screen where tracks can be assigned to either Internal CV/Gate, Midi or to the available expanders.
- Added: FX command to start a pattern from the sequencer by position
- Fixed: Avoid Sample retriggering without a playing sample
- Added: SHIFT+DELETE on a Note column acts now as either 'Delete Note' or as 'Insert Note Off', no browsing down to lowest note needed anymore.
- Fixed: possible SEGA gamepad freeze situation after saving
- Fixed: Muting for sample patterns with odd groove settings
- Added: Start playing possible from all regular screens now
- Fixed: Compact pattern function with copy/paste clipboard
- Added: Copy paste between compatible pattern columns. Copy and paste can be from all notes to all notes, triggers to triggers, grooves to grooves from different pattern types. Content can now also be copied between the 2 sample parts.
- Added: Per track multiplier / divider. Dividers and Multipliers can be either live assigned to a track or via FX command.
Dividers/Multipliers: /32,/16,/8, /7,/6,/5,/4,/3,/2, *2,*3,*4,*5,*6,*7,*8)
- Visual updates: Sequencer screen layout, divider settings are shown per track, introduced VU meters for the samples, main clock indicator update
- Added: Colors on sequencer screen. Change the colors of special parts for fast recognition
- Enhanced: Longer filenames support for sample loader
- Added Enabling/Disabling of Midi clock output
So get it, check it out. Make videos. Spread the word. Buy the expander ;-)
But most important, enjoy!!!
The new firmware is attached here. This time also as .zip, so you need to unpack it into the firmware folder te be able to use it.
The updated manual is available in this thread:
https://xor-electronics.com/forum/showth...hp?tid=370
Please check the firmware update thread as well and read in the manual in case of any update issues.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!