09-28-2019, 02:42 PM
Too enter a pattern (make sure the patterns are coloured so that you can see them) Thus is Ableton mode - Press button "C" on the right hand side of the LP and the pattern you want to enter.
Exit pattern back to sequencer press the LP button labelled "User" top right.
As I said before this works well for tracks 1 to 6 but if you enter a sample pattern on track 7 or 8 the only way out is to use nerdseq sequencer button.
Thanks for all your help got it working now , do you have any of the expanders , as when I go to track setup and select the expander then come out to the sequencer the track is set to modular again do you need to do something else to save it .
Exit pattern back to sequencer press the LP button labelled "User" top right.
As I said before this works well for tracks 1 to 6 but if you enter a sample pattern on track 7 or 8 the only way out is to use nerdseq sequencer button.
Thanks for all your help got it working now , do you have any of the expanders , as when I go to track setup and select the expander then come out to the sequencer the track is set to modular again do you need to do something else to save it .