Release Candidate Firmware V1.20 RC5

[Acheface]

I'm experimenting with the live input for triggering sample 7 (RC3).
- Why isn't sample 8 also available?
- It seems that the sample is only played for the (short) duration of the trigger. I would prefer it to be triggered and then finish till the end of the sample, as long as no new trigger is received.

See here:

Sample Gate/Pitch/Offset/Slot  Use shift up/down/left/right when setting up. All settings can be set up for each individual input and some only makes sense when combined.

You can select the other sample/outputs by shift+up/down there and so also sample 8.
The sample works as a Gate and plays as long as the gate is on. No trigger function. That also because there is no stop and leaving the samples playing always is often not wanted.

Thanks for the helpful reply! The gate behaviour makes it more difficult to use the live input for fast drum fills from e.g. Grids, but putting an ADSR with retrig functionality in the path helps a little, I've found.