More CV Expander?

[XORadmin]

You set the Track indeed to MORE CV16 and then don't forget to press SET.

Then the track itself gets a different kind of pattern screen and from there you can manipulate the CV16 stuff and all the local stuff as well. Once the track is assigned, then you also can get to the CV16 setup screen by either using the Nerd button on the track in the sequencer screen or in the track assign screen.

It is not possible to reach the expanders from the local CV/GATE tracks but only the other way around.

I will do a online video stream explaining the CV 16 expander and a Q&A.

Thanks - so I finally found the 'CV Setup screen' ... just for the benefit of other users you get to the 'CV setup screen' by first moving the cursor onto the track (that you have already assigned as 'NSA1: MORE CV 16' in the 'Track Assign' page accessed by pressing the 'Project' button) then press SHIFT+NERD button, this pops up an new window, scroll down to the 'Track Setup' options and press OK and you are now in the 'CV Setup screen'.

Once you there you can set what the 6 columns destination is - so in my case I set column 1 & 2 ('Destination 1 & 2') to `TRACK_CV' & 'TRCK_MOD' and then column/destination 3 = EXT CV1 and that allowed me to use the original CV & MOD outputs and the CV1 output for sending Notes, LFOs or envelopes.

I'm slowly figuring out how this works ...

Yes the track setup is common for all tracks like this. But it can also be entered in the track assign screen. Just press OK on the track you want to setup (once the assignment has been done)