More CV Expander?

[XORadmin]

Is it a correct statement that once a track is assigned to an expander (required) you can send pitch/gate/mod from the assigned expander track back to the outputs you just masked with FX. But you cannot send pitch/gate/mod from regular tracks to the expanders? So if you assign CV16 to track 6, you can still send output to the track 6 pitch/gate/mod outputs via FX from ANY track pattern. But you can't send anything to the CV16 (track 6) outputs from anywhere other than track 6?

Yes totally correct. That’s because there is no way to get that much information into a FX field to properly do that.

OK, well I can't say I'm happy about that. But at least I'm not making idiot statements, and I'm starting to wrap my head around the interface 

Yeah. I'm not happy either. But it is simply not really possible to do that in a proper way. Just to give the details (shown in digits to visualise it easily):
FX column for Modular tracks got 5 digits. Command (2 digits) and the values (3 digits). Theoretically I could make the values 4 digits but that wouldn't fit on the screen.
Lets assume the first Command is being used as like 'manipulate expander'. 2 digits gone. In the values you would need to say then which expander (1 digit), then you want to choose a function of the expander (2 digits) and there you go....no digits left. (at this point you still would need up to 4 digits to be able to get all possible values in there).  Even with some tricks you would still run 2-3 digits short in order to access all expander functions.

Whats left is the other way around, to use expander tracks for the cv/gate stuff. And I would say that isn't too bad either. Everything with notes can always use the local ports and also nearly all functions are always available. Tables and patches for the special tracks will be there at some point.