01-02-2020, 12:49 AM
(This post was last modified: 01-02-2020, 01:36 AM by pmarchitect.)
(12-31-2019, 11:54 AM)XORadmin Wrote:(12-30-2019, 05:17 PM)pmarchitect Wrote: Just updated and it's great.
But one problem:
I am getting stuck gates all the time from MIDI. After sending full stop signal it will trigger the first gate and then it's stuck again.
The only way to solve it is to reboot. I have had this issue with previous firmware but it was solved in 1.19. Now it's back again in 1.20
Hey, oh that is not good.
The Midi implementation changed completely with the V1.20 and was tested quite a time. However there have been 2 reports of that but i asked for more information but never got any more feedback and it was impossible for me to reproduce it. I used several sources and tried to let it fail but it always worked well for me.
However, it seems to be there and maybe you can tell me some information about it.
What hardware do you use, how did you set up and can you reproduce it/how do you reproduce it?
Hi, I am using Digitakt as a little keyboard and to program simple beats / melodies into the modular as part of my workflow. So the Digitakt sends clock and midi notes / triggers to the 6 cv/gate tracks.
I don’t know if you remember me, but I had this issue before and you were testing with the Digitone, (which I also have), and you did a quick update which totally fixed the issue.
In terms of recreating it, it will happen within 5 minutes every time of having the Nerdseq on and working (which would involve a few times stopping and starting the sequencer).
What happens is the gate gets stuck open, sending full stop turns the gate off. But after that, starting the sequencer it will be stuck open on the first gate received every time. I hope this helps. Apart from this issue everything else is looking really promising!
Happy New Year!