The Launchpad Thread

[XORadmin]

Hi there fellow nerds.

I've dusted off my barely used launchpad mini Mk2. but when connected and configured both the nerdseq and the LP just glitch out erratically. I've read the manual and forums but i'm a bit puzzled and need some help.  Midi Channel 1 set to Launch pad mini. nothing on midi channels 2-4. Midi routed to and fro via an iconnect MIO4. Nerdseq firmware 1.27C.

Are others using the same firmware successfully with their launch pad mini mk2?

The LP mini works as expected when connected to computer.

Any suggestions?

The last time I checked it it was working well here. The difference here is that I used the Retrokits rk005, maybe it is a setting in your midi controller?
I will give it a go this weekend and let you know

To my knowledge there aren't really any settings/modes on the LP mini mk2 other than device ID (set to 1) and low/full power which doesn't effect the issue.

I've gone through every page of the iConfig to make sure there are no unwanted midi routings/feedback.

I checked today again with the launchpad mini and it works well. I can see in your video a different version and it seems like a very old one, too. Maybe these got a different button layout?

I use this one:
https://novationmusic.com/sites/novation...0-2670.png

[jbaap]

hi anyone know if you can use the LP mini mk3 with a usb hub/switch?
if so what hub swithch do i need.
if someone made it work please post what you need and how to,
maybe a list of working devices will appear if people made it work with different devices.
i tried 3 different usb hubs with no luck,
  i tried power hub from hdmi expander, then LP to the hub, and an usb to midi thing from hub to more i/o midi ports.
 would i need a usb switch or splitter not a hub?
should i choose LP pro or mini in NS setup?
should i give up and wait for expander or is there any tips,

[Ruido]

Hi,

I have a question on LP & CV16.

I want to input triads via LP . Currently I am only able to put a note in via Lp at the position of the cursor. 
So 2 problems, can't input on the fly and not the triads directly.
Ideally I'd like to input with LP chord mode. 

Would be great if someone has a solution to that.

Thx in advance

[chriswest]

Howdy nerds- first time poster and total midi noob here.

So I’ve had the Nerdseq for nearly two weeks now and am having a “where have you been all my life, baby?” moment with it. Shoutouts to thomas and the community for creating an outstanding product.

My issue at the moment involves the Launchpad pro with the nerdseq. 
I’d like to use the LP pro note mode (as has been previously discribed) to input live notes and on the fly via the recording funktion on nerdseq.
This seems to be working fine for the note values, but is simultaneously influencing trigger information and messing up any previously programmed triggers and ratcheting info. 

I guess I’m wondering if there is any way of decoupling the recorded notevalue- from the trigger changes so that i can have the trigger values only manipulated via the nerdseq or LP programming mode?

Thanks in advance!