Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware V1.10
#1
This is a bigger update with some essential changings to the storage. This is a good time to backup your SD Card (before upgrading). Anyway, no worries at all as you can always go back to an older version, in case that any issues occour.

- Added: SHIFT+Pagedown on pattern screen in mark-mode marks all
- Fixed: pitch note which works now also on the same step
- Added: setup setting to load settings backup (when debug is enabled)
- Fixed: 'do always change' parameters which work well now for patches and tables. So the same value is being send every time

- Change: system settings are now stored on the eeprom
- Fixed: Probability changes now with the current step
- Added: clone pattern function by pressing SHIFT+OK. If there is a pattern number already, then a new pattern is created and the old pattern cloned in it
- Added: table probability
- Added: FX probability
- Added: Tempo setting, so the main tempo can be changed from FX
- Added: Break FX function got now a jump to step parameter. If a number is filled in and first digit is 1  ( eg 102) then it will jump to position 02 of the same pattern
- Extended: Tempo up to 500 bpm
- Enhanced groove setting up to 32
- Change: Init probability value is now 100 when editing and not 0
- Fix: of not setting the trigger (and other stuff) well from another pattern in the FX column
- Changed: Order in project screen
- Changed: Player doesn't stop now anymore when changing record settings

- Added: the display of decimal values
- Added: reset pulse (10ms) when stopping the sequencer
- Changed: avoid to start record from other screens than sequencer or pattern screen
- Fixed: weird deletion when deleting a marked value (fx did weird)
- Fixed: the problem where one couldn't choose pattern 00 anymore on the sequencer screen
- Changed: no pattern creation anymore with OK when mark mode is on
- Changed: no patch creation anymore with OK when mark mode is on
- Changed: slightly changed colour to get better contour

The manual is already updated to describe the new functions.

Happy tracking and merry christmas!!!


Attached Files
.hex   nerdseq.hex (Size: 1,25 MB / Downloads: 43)
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
#2
Updated manual here:
http://xor-electronics.com/nerdseq_manual_0_9_6/
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
#3
Wooohoo! Thank you Thomas! Happy Holidays!
Reply
#4
thank you, thats a great gift Smile
Reply
#5
Fantastic new colors, no need for a menu anymore, also all new other features Cool

Wish you a merry Xmas Smile
Reply
#6
Nice!! Cheers Thomas, can't wait to try this out.
Reply
#7
Happy xmas!
Those are some changes I really like! (Mark all, duplicate pattern)
Will check it tomorrow
Reply
#8
Yes happy xmas! 
But there is no new function I want in my dream...
Thanks you for all the bug correction!
Thanks for the do alaways change!
Thanks for probability at 100%
Thanks for the new color interface!
Thanks for the new fx (bpm & jump)
I don't use the mark function... But thanks again

I use an Eowave ribbon connect to the in 1&2 for real time recording cv/gate,  but when I hold a note the sequencer don't overdub the length of the note just the note...
No passing thru the input to output
No auto assign input with the track selection
And no EG & LFO for xmas...

My dreams are broken
Reply
#9
(12-25-2017, 06:10 PM)Mooko Wrote: 1 I use an Eowave ribbon connect to the in 1&2 for real time recording cv/gate,  but when I hold a note the sequencer don't overdub the length of the note just the note...
2 No passing thru the input to output
3 No auto assign input with the track selection 1
4 And no EG & LFO for xmas...

My dreams are broken

You can now jump back to your dreams by using the BRK command with the first digit set to 1 (eg 100)  ;-)

1  Video needed, what does the Eowave ribbon do exactly, what is connected and what is not working exactly/what do you expect?
2  You mean without recording?? Or midi?
3  Explain
4  Not on top of my list. LFO, EG and other extra functions will be part of the automation set which i hopefully will implement soonish. (there is soo much 2 do)
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!  Smile
Reply
#10
how is SHIFT DOWN DELETE now supposed to work?
i end up with everything marked

edit: .. and a happy new year! Smile
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)