Posts: 3.664
Threads: 123
Joined: Jul 2017
Reputation:
215
Posts: 44
Threads: 17
Joined: Jun 2018
Reputation:
0
In the instructions, it says:
Disconnect all expanders on the NSA port except for the one to be updated!!!
I assume you wouldn't have included that step if it weren't necessary, but that's certainly a pain, especially if the expanders are spread out across your case. Do you have any planes to change this so that firmware update will only affect the targeted expander so we don't have to disconnect the rest?
Posts: 3.664
Threads: 123
Joined: Jul 2017
Reputation:
215
That is one of the reasons the update is needed in some cases.
It works normally like this.
But mainly if you don’t have any issues and all works fine, then you don’t need to update at all.
It doesn’t add any features.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help! 
Posts: 42
Threads: 9
Joined: Jun 2019
Reputation:
0
Hi there,
I tried to update by following the instructions exactly but still got an error message.
My CV16 was at address 2. I had the idea to put the jumper on 1 and it worked! If ever...
Posts: 23
Threads: 1
Joined: May 2018
Reputation:
0
No issues here updating! I followed the instructions leaving only the CV16 connected and appropriate jumper setting. Went smoothly. I originally thought had to update ALL expanders. But nope, just the CV16.
Posts: 2
Threads: 0
Joined: Oct 2020
Reputation:
0
This update sorted out some strange issues I was having, thank you!
Posts: 17
Threads: 3
Joined: Nov 2022
Reputation:
1
Hi,
The v1.26 manual states that that the CV16 v.1.2 firmware adds simple trigger functionality. Is that a typo or am I missing a newer firmware than v1.1? I'm trying to use "Track Trigger 6 XXX" but my scope doesn't show anything being sent out of any of the options, e.g. TT8. Note and envelopes/LFOs work fine.
