CV16 Expander Firmware V1.1

[mgd]

You'll find it in the v1.26 Release Candidate thread (first post):
https://xor-electronics.com/forum/showth...p?tid=1348

[Inkog]

Thanks. CV16 updated and calibrated. I got triggers working using the Type 7 LFO. What is the intended function of Track Triggers TT & TD? I still can't get them to work on the updated firmware.

[mgd]

Thanks. CV16 updated and calibrated. I got triggers working using the Type 7 LFO.   What is the intended function of Track Triggers TT & TD? I still can't get them to work on the updated firmware.

According to the manual TT is for the trigger output of the current track (aka the local trigger output of the main module) while TD uses the CV output that's assigned for this lane (the CV16 pattern screen has 6 lanes which can be assigned arbitrary outputs of the CV1 - CV16 of the current CV16 expander).

So if track 4 is assigned to NSA2 (a CV16 expander) then TT addresses Trigger 4 of the main module.
When the lanes 1-6 are assigned to CV4, CV6, CV7, CV9, CV10, CV11 (just to have some arbitrary assignments) then TD on these lanes go to outputs CV4, CV6, CV7, CV9, CV10 and CV11 respectively (for lanes 1-6).

At least that's how I understand the manual (haven't tried it).

Kind regards,
Michael

[Inkog]

I got TT working on a fresh project. TT is triggering on the Main Module as expected. Weird thing is TD8 triggers the main module also, not the assigned out.