Hopefully this is clear and helpful:
I have sample track 7 outputting a saw oscillator, with volume set to max. I can hear the oscillator. So far so good.
I have sample track 8 set up with a clap sample that I intend to trigger via input 1.
In the Setup menu under "Input/Record Setup" I configure "Input 1 LIVE" to send to SAMPLE GATE 8. When I trigger the input I can hear the clap sample play. So far so good.
But when running both track 7 and 8 at the same time, the oscillator on sample track 7 cuts out as soon as a gate is sent to sample track 8.
I have sample track 7 outputting a saw oscillator, with volume set to max. I can hear the oscillator. So far so good.
I have sample track 8 set up with a clap sample that I intend to trigger via input 1.
In the Setup menu under "Input/Record Setup" I configure "Input 1 LIVE" to send to SAMPLE GATE 8. When I trigger the input I can hear the clap sample play. So far so good.
But when running both track 7 and 8 at the same time, the oscillator on sample track 7 cuts out as soon as a gate is sent to sample track 8.