Posts: 472
Threads: 58
Joined: Dec 2020
Reputation:
34
Hi Forum,
I'd like to see a JUMP command that is executed a set number of times.
I could also see use for JUMP conditional on one of the CV inputs, i.e. CV above/equal/below a certain value/note.
Kind regards,
Michael
Posts: 3.699
Threads: 125
Joined: Jul 2017
Reputation:
215
If you have a good Idea about how to implement that into the current commands (within the digits of the FX), that would be nice. If I add something it has to fit into the current workflow without any extra special setting for functions. So a special CV function for one FX is not really something I would add.
You could route a probability from the automators to a FX and the source could be a CV input. Then you could set a high/full probability or zero to get a 'execute' or mostly don't execute condition.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Posts: 472
Threads: 58
Joined: Dec 2020
Reputation:
34
Hi Thomas,
I've thought a bit and the requirement to stay within the existing command framework kind of defies "proper" interface design, but here I go:
As suggested by you PRF1/2/3/4 shall be used to provide an additional parameter.
BRK 2xx jumps n times to row/position xx in the same pattern (forward and backwards). n is provided by PRFx. I don't know wether allowing for more than 100 rounds is required (read: I think 100 repetitions is enough).
BRK 3xx/4xx/5xx/6xx conditionally jumps to row/position xx in the same pattern (forward and backwards). The condition is TRUE when CV In 1/2/3/4 is "high" (I don't think that comparing CV In 1/2/3/4 against a specific value provided by PRFx would be more useful - others may differ).
I'm not convinced the above provides for a clean interface, but w/o adding new mnemonics that seems to be the best I could come up with.
Kind regards,
Michael